A-Tech 16GB (4x4GB) DDR4 2133MHz PC4-17000 UDIMM CL15 288-Pin Desktop RAM Kit
- 16GB (4 x 4GB)
- 288-Pin PC RAM
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
A-Tech
A 16 GB quad-channel DDR4 kit running at 3200 MHz with 1.2 V CL22 timing for desktop upgrades
Capacity 16GB (4 x 4GB)
Speed DDR4 3200 (PC4 25600)
This kit provides 16 GB of DDR4 desktop memory arranged as four 4 GB modules. It is intended for users who want to fill four DIMM slots on a compatible motherboard in a single purchase.
The modules replace any existing DDR4 DIMMs running at lower speeds or smaller capacities. The jump is worthwhile when your current memory limits multitasking or when applications report insufficient RAM for smooth operation.
Verify that your motherboard supports DDR4 3200 MT/s UDIMM memory at 1.2 V with a CAS latency of 22. Confirm the board has four free 288-pin slots and that the CPU or chipset can address the full 16 GB in quad-channel mode.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Desktop Memory RAM |
| Model | A-Tech 16GB Kit (4x4GB) DDR4-3200 Desktop RAM |
| Capacity | 16GB (4 x 4GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Selle mudeli teised versioonid
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
The kit is built to the standard DDR4 288‑pin UDIMM form factor and runs at 1.20 V, so any desktop board that supports DDR4 3200 MHz non‑ECC memory can use it.
Most modern platforms will select the 3200 MHz speed automatically; if the board defaults to a lower frequency, enable the XMP or DOCP profile in the BIOS to run at the rated 3200 MHz.
Mixing is possible only if the other sticks are also DDR4 non‑ECC unbuffered DIMMs at 1.20 V; matching speed and CL22 timings will give the best stability.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?