A-Tech 16GB (4x4GB) DDR4 2133MHz PC4-17000 UDIMM CL15 288-Pin Desktop RAM Kit
- 16GB (4 x 4GB)
- 288-Pin PC RAM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
A 16 GB quad-channel DDR4 kit running at 3200 MHz with 1.2 V CL22 timing for desktop upgrades
Capacity 16GB (4 x 4GB)
Speed DDR4 3200 (PC4 25600)
This kit provides 16 GB of DDR4 desktop memory arranged as four 4 GB modules. It is intended for users who want to fill four DIMM slots on a compatible motherboard in a single purchase.
The modules replace any existing DDR4 DIMMs running at lower speeds or smaller capacities. The jump is worthwhile when your current memory limits multitasking or when applications report insufficient RAM for smooth operation.
Verify that your motherboard supports DDR4 3200 MT/s UDIMM memory at 1.2 V with a CAS latency of 22. Confirm the board has four free 288-pin slots and that the CPU or chipset can address the full 16 GB in quad-channel mode.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Desktop Memory RAM |
| Model | A-Tech 16GB Kit (4x4GB) DDR4-3200 Desktop RAM |
| Capacity | 16GB (4 x 4GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The kit is built to the standard DDR4 288‑pin UDIMM form factor and runs at 1.20 V, so any desktop board that supports DDR4 3200 MHz non‑ECC memory can use it.
Most modern platforms will select the 3200 MHz speed automatically; if the board defaults to a lower frequency, enable the XMP or DOCP profile in the BIOS to run at the rated 3200 MHz.
Mixing is possible only if the other sticks are also DDR4 non‑ECC unbuffered DIMMs at 1.20 V; matching speed and CL22 timings will give the best stability.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?