NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
32 GB DDR4 2400 ECC registered server memory with CL17 latency and 1.20 V operation
This 32 GB DDR4 registered DIMM is built for servers and workstations that require error-correcting memory. The module uses a 2Rx4 organisation and runs at the standard 1.20 V.
Registered DIMMs add a register between the memory controller and the DRAM chips, which reduces electrical load and allows higher capacities per channel. The trade-off is one extra clock cycle of latency compared with unbuffered modules. This stick operates at DDR4 2400 with a CL17 timing and will only function in platforms that support registered ECC memory.
Verify that your motherboard or system accepts 288-pin DDR4 RDIMMs with ECC and a 2Rx4 rank configuration. Confirm the maximum supported speed per slot and the total memory capacity allowed by the CPU and chipset. Ensure the BIOS is current enough to recognise 32 GB registered modules.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
This listing is a single 32GB DDR4 2400 (PC4-19200) ECC RDIMM with 2Rx4 organisation, CL17 latency and 1.20V operation; select it when your server or workstation requires exactly one registered 288-pin module of that specification.
The module transfers data at 2400 MT/s with CL17 timing, delivering registered ECC error correction at the standard DDR4 1.20V level for stable operation in compatible server and workstation platforms.
The 288-pin registered DIMM interface limits use to systems that accept DDR4 ECC RDIMMs; it will not fit UDIMM, SO-DIMM or non-DDR4 slots, and the platform must support registered signalling and ECC functionality.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?