NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
32 GB DDR4 2400 ECC registered server memory with CL17 latency and 1.20 V operation
This 32 GB DDR4 registered DIMM is built for servers and workstations that require error-correcting memory. The module uses a 2Rx4 organisation and runs at the standard 1.20 V.
Registered DIMMs add a register between the memory controller and the DRAM chips, which reduces electrical load and allows higher capacities per channel. The trade-off is one extra clock cycle of latency compared with unbuffered modules. This stick operates at DDR4 2400 with a CL17 timing and will only function in platforms that support registered ECC memory.
Verify that your motherboard or system accepts 288-pin DDR4 RDIMMs with ECC and a 2Rx4 rank configuration. Confirm the maximum supported speed per slot and the total memory capacity allowed by the CPU and chipset. Ensure the BIOS is current enough to recognise 32 GB registered modules.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
This listing is a single 32GB DDR4 2400 (PC4-19200) ECC RDIMM with 2Rx4 organisation, CL17 latency and 1.20V operation; select it when your server or workstation requires exactly one registered 288-pin module of that specification.
The module transfers data at 2400 MT/s with CL17 timing, delivering registered ECC error correction at the standard DDR4 1.20V level for stable operation in compatible server and workstation platforms.
The 288-pin registered DIMM interface limits use to systems that accept DDR4 ECC RDIMMs; it will not fit UDIMM, SO-DIMM or non-DDR4 slots, and the platform must support registered signalling and ECC functionality.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?