NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
A-Tech
32 GB DDR4 2400 ECC registered server memory with CL17 latency and 1.20 V operation
This 32 GB DDR4 registered DIMM is built for servers and workstations that require error-correcting memory. The module uses a 2Rx4 organisation and runs at the standard 1.20 V.
Registered DIMMs add a register between the memory controller and the DRAM chips, which reduces electrical load and allows higher capacities per channel. The trade-off is one extra clock cycle of latency compared with unbuffered modules. This stick operates at DDR4 2400 with a CL17 timing and will only function in platforms that support registered ECC memory.
Verify that your motherboard or system accepts 288-pin DDR4 RDIMMs with ECC and a 2Rx4 rank configuration. Confirm the maximum supported speed per slot and the total memory capacity allowed by the CPU and chipset. Ensure the BIOS is current enough to recognise 32 GB registered modules.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
This listing is a single 32GB DDR4 2400 (PC4-19200) ECC RDIMM with 2Rx4 organisation, CL17 latency and 1.20V operation; select it when your server or workstation requires exactly one registered 288-pin module of that specification.
The module transfers data at 2400 MT/s with CL17 timing, delivering registered ECC error correction at the standard DDR4 1.20V level for stable operation in compatible server and workstation platforms.
The 288-pin registered DIMM interface limits use to systems that accept DDR4 ECC RDIMMs; it will not fit UDIMM, SO-DIMM or non-DDR4 slots, and the platform must support registered signalling and ECC functionality.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?