NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
A 32 GB DDR4 2666 MHz DIMM for desktop computers, tested at 2666 MHz and running at 1.20 V
This single 32GB DDR4 DIMM runs at 2666MHz PC4-21300 with a standard 1.20V supply. It is built as an unbuffered non-ECC module for AMD and Intel desktop platforms. The 288-pin form factor fits mainstream desktop motherboards that support DDR4 memory. Buyers who need ECC error correction or registered buffering cannot use this module.
At the rated 1.20V the module operates within the normal DDR4 thermal envelope without active cooling. Passive heat spreaders on the PCB dissipate heat quietly during typical desktop workloads. Power draw scales with frequency and capacity, so a single 32GB stick adds only modest load to the system power budget. Systems with restricted airflow should still verify case ventilation.
Under continuous heavy use the module maintains its tested 2666MHz frequency without throttling. The 2Rx8 organisation provides sufficient bandwidth for extended multitasking and large dataset processing. Stability is validated through the manufacturer's quality assurance testing for long-duration operation. Workloads that demand higher frequencies or lower latencies will require faster-rated memory.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| Tested Frequency | 2666 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Yes, the module uses the standard 288-pin DDR4 DIMM form factor, so it will seat in any desktop board that accepts DDR4 UDIMMs.
The module operates at the standard 1.20 V DDR4 voltage, matching the requirement of virtually all current DDR4 desktop platforms.
The product is listed as a compatible replacement for both Hynix part numbers, sharing the same 32 GB capacity, 2666 MHz speed, non-ECC unbuffered design and 1.2 V operation.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?