NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 32 GB DDR4 2666 MHz DIMM for desktop computers, tested at 2666 MHz and running at 1.20 V
This single 32GB DDR4 DIMM runs at 2666MHz PC4-21300 with a standard 1.20V supply. It is built as an unbuffered non-ECC module for AMD and Intel desktop platforms. The 288-pin form factor fits mainstream desktop motherboards that support DDR4 memory. Buyers who need ECC error correction or registered buffering cannot use this module.
At the rated 1.20V the module operates within the normal DDR4 thermal envelope without active cooling. Passive heat spreaders on the PCB dissipate heat quietly during typical desktop workloads. Power draw scales with frequency and capacity, so a single 32GB stick adds only modest load to the system power budget. Systems with restricted airflow should still verify case ventilation.
Under continuous heavy use the module maintains its tested 2666MHz frequency without throttling. The 2Rx8 organisation provides sufficient bandwidth for extended multitasking and large dataset processing. Stability is validated through the manufacturer's quality assurance testing for long-duration operation. Workloads that demand higher frequencies or lower latencies will require faster-rated memory.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| Tested Frequency | 2666 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Yes, the module uses the standard 288-pin DDR4 DIMM form factor, so it will seat in any desktop board that accepts DDR4 UDIMMs.
The module operates at the standard 1.20 V DDR4 voltage, matching the requirement of virtually all current DDR4 desktop platforms.
The product is listed as a compatible replacement for both Hynix part numbers, sharing the same 32 GB capacity, 2666 MHz speed, non-ECC unbuffered design and 1.2 V operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?