NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
A-Tech
A 32 GB DDR4 2666 MHz DIMM for desktop computers, tested at 2666 MHz and running at 1.20 V
This single 32GB DDR4 DIMM runs at 2666MHz PC4-21300 with a standard 1.20V supply. It is built as an unbuffered non-ECC module for AMD and Intel desktop platforms. The 288-pin form factor fits mainstream desktop motherboards that support DDR4 memory. Buyers who need ECC error correction or registered buffering cannot use this module.
At the rated 1.20V the module operates within the normal DDR4 thermal envelope without active cooling. Passive heat spreaders on the PCB dissipate heat quietly during typical desktop workloads. Power draw scales with frequency and capacity, so a single 32GB stick adds only modest load to the system power budget. Systems with restricted airflow should still verify case ventilation.
Under continuous heavy use the module maintains its tested 2666MHz frequency without throttling. The 2Rx8 organisation provides sufficient bandwidth for extended multitasking and large dataset processing. Stability is validated through the manufacturer's quality assurance testing for long-duration operation. Workloads that demand higher frequencies or lower latencies will require faster-rated memory.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| Tested Frequency | 2666 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Yes, the module uses the standard 288-pin DDR4 DIMM form factor, so it will seat in any desktop board that accepts DDR4 UDIMMs.
The module operates at the standard 1.20 V DDR4 voltage, matching the requirement of virtually all current DDR4 desktop platforms.
The product is listed as a compatible replacement for both Hynix part numbers, sharing the same 32 GB capacity, 2666 MHz speed, non-ECC unbuffered design and 1.2 V operation.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?