Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

A-Tech

A-Tech 4GB DDR3 1066MHz PC3-8500 ECC RDIMM 4Rx8 Server RAM

SKU CH-HZCM-MWAH7

4GB DDR3 1066MHz ECC registered server memory with 4Rx8 organisation and 1.5V operation

  • Capacity4GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Boosts server responsiveness with 4GB DDR3 1066MHz capacity
  • Ensures data integrity through ECC registered DIMM design
  • Delivers stable operation at standard 1.50V DDR3 voltage
  • Verified compatible replacement for Hynix 151 series modules
  • Rigorously tested for dependable server and workstation performance

Server Memory Upgrade

This 4 GB DDR3 registered DIMM is built for servers and workstations that require ECC error correction. It replaces Hynix modules HMT151R7AFP8C-G7, HMT151R7BFR8C-G7 and HMT151R7TFR8C-G7 in compatible systems. The module runs at 1066 MHz with a CL7 latency and standard 1.5 V operation.

Registered ECC Requirement

The single specification that decides fit is the registered ECC RDIMM 4Rx8 organisation. Your motherboard must support registered error-correcting memory with this rank configuration; unbuffered or non-ECC DIMMs will not work in its place. Verify the platform documentation before ordering.

240-Pin DIMM Installation

Installation follows the standard 240-pin DDR3 DIMM procedure: align the notch, press firmly until the retention clips lock. The usual issue is mixing registered and unbuffered modules or exceeding the server's maximum rank count per channel, which prevents the system from posting.

Erősségek

  • Boosts server responsiveness with 4GB DDR3 1066MHz capacity
  • Ensures data integrity through ECC registered DIMM design
  • Delivers stable operation at standard 1.50V DDR3 voltage
  • Verified compatible replacement for Hynix 151 series modules
  • Rigorously tested for dependable server and workstation performance

Műszaki adatok

BrandA-Tech
Capacity4GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kérdések a termékről

What does the 1066 MHz speed mean once the module is installed in a server?

The module runs at 1066 MHz DDR3, delivering a PC3-8500 data rate of 8500 MB/s when the platform supports that frequency.

How does the registered DDR3 interface affect what the system can use?

The 240-pin registered DIMM presents a buffered signal to the memory controller, so the motherboard must support registered ECC DDR3 to operate correctly.

What physical slot and clearance does this 4Rx8 module require?

It fits a standard 240-pin DDR3 DIMM socket; the 4Rx8 organisation uses the full module height, so verify that the server chassis allows full-height DIMMs.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.