We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 240-pin DDR3 DIMM with silver heat spreader and black chips

A-Tech

A-Tech 4GB DDR3 1066MHz PC3-8500 ECC RDIMM 4Rx8 Server RAM

SKU CH-HZCM-MWAH7

4GB DDR3 1066MHz ECC registered server memory with 4Rx8 organisation and 1.5V operation

  • Capacity4GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Boosts server responsiveness with 4GB DDR3 1066MHz capacity
  • Ensures data integrity through ECC registered DIMM design
  • Delivers stable operation at standard 1.50V DDR3 voltage
  • Verified compatible replacement for Hynix 151 series modules
  • Rigorously tested for dependable server and workstation performance

Server Memory Upgrade

This 4 GB DDR3 registered DIMM is built for servers and workstations that require ECC error correction. It replaces Hynix modules HMT151R7AFP8C-G7, HMT151R7BFR8C-G7 and HMT151R7TFR8C-G7 in compatible systems. The module runs at 1066 MHz with a CL7 latency and standard 1.5 V operation.

Registered ECC Requirement

The single specification that decides fit is the registered ECC RDIMM 4Rx8 organisation. Your motherboard must support registered error-correcting memory with this rank configuration; unbuffered or non-ECC DIMMs will not work in its place. Verify the platform documentation before ordering.

240-Pin DIMM Installation

Installation follows the standard 240-pin DDR3 DIMM procedure: align the notch, press firmly until the retention clips lock. The usual issue is mixing registered and unbuffered modules or exceeding the server's maximum rank count per channel, which prevents the system from posting.

Highlights

  • Boosts server responsiveness with 4GB DDR3 1066MHz capacity
  • Ensures data integrity through ECC registered DIMM design
  • Delivers stable operation at standard 1.50V DDR3 voltage
  • Verified compatible replacement for Hynix 151 series modules
  • Rigorously tested for dependable server and workstation performance

Specifications

BrandA-Tech
Capacity4GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Questions about this item

What does the 1066 MHz speed mean once the module is installed in a server?

The module runs at 1066 MHz DDR3, delivering a PC3-8500 data rate of 8500 MB/s when the platform supports that frequency.

How does the registered DDR3 interface affect what the system can use?

The 240-pin registered DIMM presents a buffered signal to the memory controller, so the motherboard must support registered ECC DDR3 to operate correctly.

What physical slot and clearance does this 4Rx8 module require?

It fits a standard 240-pin DDR3 DIMM socket; the 4Rx8 organisation uses the full module height, so verify that the server chassis allows full-height DIMMs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.