Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

A-Tech

A-Tech 4GB DDR3 1066MHz PC3-8500 ECC RDIMM 4Rx8 Server RAM

SKU CH-HZCM-MWAH7

4GB DDR3 1066MHz ECC registered server memory with 4Rx8 organisation and 1.5V operation

  • Capacity4GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Boosts server responsiveness with 4GB DDR3 1066MHz capacity
  • Ensures data integrity through ECC registered DIMM design
  • Delivers stable operation at standard 1.50V DDR3 voltage
  • Verified compatible replacement for Hynix 151 series modules
  • Rigorously tested for dependable server and workstation performance

Server Memory Upgrade

This 4 GB DDR3 registered DIMM is built for servers and workstations that require ECC error correction. It replaces Hynix modules HMT151R7AFP8C-G7, HMT151R7BFR8C-G7 and HMT151R7TFR8C-G7 in compatible systems. The module runs at 1066 MHz with a CL7 latency and standard 1.5 V operation.

Registered ECC Requirement

The single specification that decides fit is the registered ECC RDIMM 4Rx8 organisation. Your motherboard must support registered error-correcting memory with this rank configuration; unbuffered or non-ECC DIMMs will not work in its place. Verify the platform documentation before ordering.

240-Pin DIMM Installation

Installation follows the standard 240-pin DDR3 DIMM procedure: align the notch, press firmly until the retention clips lock. The usual issue is mixing registered and unbuffered modules or exceeding the server's maximum rank count per channel, which prevents the system from posting.

Pluspunten

  • Boosts server responsiveness with 4GB DDR3 1066MHz capacity
  • Ensures data integrity through ECC registered DIMM design
  • Delivers stable operation at standard 1.50V DDR3 voltage
  • Verified compatible replacement for Hynix 151 series modules
  • Rigorously tested for dependable server and workstation performance

Specificaties

BrandA-Tech
Capacity4GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

What does the 1066 MHz speed mean once the module is installed in a server?

The module runs at 1066 MHz DDR3, delivering a PC3-8500 data rate of 8500 MB/s when the platform supports that frequency.

How does the registered DDR3 interface affect what the system can use?

The 240-pin registered DIMM presents a buffered signal to the memory controller, so the motherboard must support registered ECC DDR3 to operate correctly.

What physical slot and clearance does this 4Rx8 module require?

It fits a standard 240-pin DDR3 DIMM socket; the 4Rx8 organisation uses the full module height, so verify that the server chassis allows full-height DIMMs.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.