NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
A 4GB DDR3 DIMM running at 1600MHz with CL11 latency and 1.5V operation for desktop upgrades
This A-Tech module is a 4GB DDR3 DIMM rated at 1600MHz with CL11 latency and 1.5V operation. It is built as an unbuffered non-ECC stick using major brand chips and has no heat spreader. The part serves as a direct replacement for several Corsair kits including CML16GX3M4A1600C9B and CMY8GX3M2A1600C9A. It targets desktop owners who need a simple capacity increase.
Before ordering confirm that your motherboard accepts DDR3 DIMMs and has a free 240-pin slot. The module runs at the standard 1.50V DDR3 voltage so no special voltage setting is required. Verify the maximum supported frequency and total capacity allowed by your board and CPU. Mixing this CL11 stick with existing modules of different timings may force the system to run at the slowest common settings.
This 4GB stick replaces the exact Corsair part numbers shown in the compatibility list. The upgrade is worth it when your current installation is below the motherboard limit and you experience slowdowns during multitasking. If your system already runs at the maximum supported memory size adding another module will not increase usable capacity. Choose this module to match the specified 1600MHz speed and CL11 timing of the original kits.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Corsair |
| Model | CML16GX3M4A1600C9B, CML16GX3M4X1600C7, CML16GX3M4X1600C8, CMX16GX3M4A1600C9, CMY8GX3M2A1600C9A |
| Capacity | 4GB |
| Speed | DDR3 1600 (PC3 12800) |
| Tested Frequency | 1600 |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | CML16GX3M4A1600C9B, CML16GX3M4X1600C7, CML16GX3M4X1600C8, CMX16GX3M4A1600C9, CMY8GX3M2A1600C9A |
| Recommend Use | Compatible Replacement for Corsair CML16GX3M4A1600C9B, CML16GX3M4X1600C7, CML16GX3M4X1600C8, CMX16GX3M4A1600C9, CMY8GX3M2A1600C9A |
The package contains a single 4GB DDR3 1600MHz CL11 1.5V DIMM; no additional cables, brackets or documentation are included.
Choose this 4GB DDR3 1600MHz CL11 module when your board has a free 240-pin slot and the manufacturer lists 4GB PC3-12800 unbuffered non-ECC memory as supported.
The module runs at 1600MHz with CL11 latency at 1.5V, providing the standard DDR3 bandwidth your desktop chipset expects for everyday multitasking.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?