Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A-Tech
A 4GB DDR3 DIMM running at 1600MHz with CL11 latency and 1.5V operation for desktop upgrades
This A-Tech module is a 4GB DDR3 DIMM rated at 1600MHz with CL11 latency and 1.5V operation. It is built as an unbuffered non-ECC stick using major brand chips and has no heat spreader. The part serves as a direct replacement for several Corsair kits including CML16GX3M4A1600C9B and CMY8GX3M2A1600C9A. It targets desktop owners who need a simple capacity increase.
Before ordering confirm that your motherboard accepts DDR3 DIMMs and has a free 240-pin slot. The module runs at the standard 1.50V DDR3 voltage so no special voltage setting is required. Verify the maximum supported frequency and total capacity allowed by your board and CPU. Mixing this CL11 stick with existing modules of different timings may force the system to run at the slowest common settings.
This 4GB stick replaces the exact Corsair part numbers shown in the compatibility list. The upgrade is worth it when your current installation is below the motherboard limit and you experience slowdowns during multitasking. If your system already runs at the maximum supported memory size adding another module will not increase usable capacity. Choose this module to match the specified 1600MHz speed and CL11 timing of the original kits.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Corsair |
| Model | CML16GX3M4A1600C9B, CML16GX3M4X1600C7, CML16GX3M4X1600C8, CMX16GX3M4A1600C9, CMY8GX3M2A1600C9A |
| Capacity | 4GB |
| Speed | DDR3 1600 (PC3 12800) |
| Tested Frequency | 1600 |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | CML16GX3M4A1600C9B, CML16GX3M4X1600C7, CML16GX3M4X1600C8, CMX16GX3M4A1600C9, CMY8GX3M2A1600C9A |
| Recommend Use | Compatible Replacement for Corsair CML16GX3M4A1600C9B, CML16GX3M4X1600C7, CML16GX3M4X1600C8, CMX16GX3M4A1600C9, CMY8GX3M2A1600C9A |
The package contains a single 4GB DDR3 1600MHz CL11 1.5V DIMM; no additional cables, brackets or documentation are included.
Choose this 4GB DDR3 1600MHz CL11 module when your board has a free 240-pin slot and the manufacturer lists 4GB PC3-12800 unbuffered non-ECC memory as supported.
The module runs at 1600MHz with CL11 latency at 1.5V, providing the standard DDR3 bandwidth your desktop chipset expects for everyday multitasking.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?