A-Tech
A-Tech 4GB DDR3 1600MHz CL11 1.5V Desktop RAM
A 4GB DDR3 DIMM running at 1600MHz with CL11 latency and 1.5V operation for desktop upgrades
- Capacity4GB
- SpeedDDR3 1600 (PC3 12800)
- Tested Frequency1600
- CAS LatencyCL11
- Voltage1.50V
- ECCNo
- 4 GB module expands desktop memory capacity
- DDR3 1600 MHz speed accelerates data throughput
- CL11 latency at 1.5 V balances responsiveness and power draw
- 240-pin unbuffered DIMM fits standard desktop slots
- Tested for reliable operation in compatible Corsair replacement systems
A-Tech 4GB DDR3 1600MHz Desktop Module
This A-Tech module is a 4GB DDR3 DIMM rated at 1600MHz with CL11 latency and 1.5V operation. It is built as an unbuffered non-ECC stick using major brand chips and has no heat spreader. The part serves as a direct replacement for several Corsair kits including CML16GX3M4A1600C9B and CMY8GX3M2A1600C9A. It targets desktop owners who need a simple capacity increase.
Check Motherboard Slots and DDR3 Support
Before ordering confirm that your motherboard accepts DDR3 DIMMs and has a free 240-pin slot. The module runs at the standard 1.50V DDR3 voltage so no special voltage setting is required. Verify the maximum supported frequency and total capacity allowed by your board and CPU. Mixing this CL11 stick with existing modules of different timings may force the system to run at the slowest common settings.
Replaces Listed Corsair Kits When Capacity Is Needed
This 4GB stick replaces the exact Corsair part numbers shown in the compatibility list. The upgrade is worth it when your current installation is below the motherboard limit and you experience slowdowns during multitasking. If your system already runs at the maximum supported memory size adding another module will not increase usable capacity. Choose this module to match the specified 1600MHz speed and CL11 timing of the original kits.
Points forts
- 4 GB module expands desktop memory capacity
- DDR3 1600 MHz speed accelerates data throughput
- CL11 latency at 1.5 V balances responsiveness and power draw
- 240-pin unbuffered DIMM fits standard desktop slots
- Tested for reliable operation in compatible Corsair replacement systems
Caractéristiques
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Corsair |
| Model | CML16GX3M4A1600C9B, CML16GX3M4X1600C7, CML16GX3M4X1600C8, CMX16GX3M4A1600C9, CMY8GX3M2A1600C9A |
| Capacity | 4GB |
| Speed | DDR3 1600 (PC3 12800) |
| Tested Frequency | 1600 |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | CML16GX3M4A1600C9B, CML16GX3M4X1600C7, CML16GX3M4X1600C8, CMX16GX3M4A1600C9, CMY8GX3M2A1600C9A |
| Recommend Use | Compatible Replacement for Corsair CML16GX3M4A1600C9B, CML16GX3M4X1600C7, CML16GX3M4X1600C8, CMX16GX3M4A1600C9, CMY8GX3M2A1600C9A |
Questions sur cet article
Does the 4GB DDR3 1600MHz CL11 module ship alone or with extra parts?
The package contains a single 4GB DDR3 1600MHz CL11 1.5V DIMM; no additional cables, brackets or documentation are included.
Should I pick the 4GB 1600MHz CL11 stick or a different capacity for my desktop?
Choose this 4GB DDR3 1600MHz CL11 module when your board has a free 240-pin slot and the manufacturer lists 4GB PC3-12800 unbuffered non-ECC memory as supported.
What does the 1600MHz PC3-12800 rating deliver once the stick is installed?
The module runs at 1600MHz with CL11 latency at 1.5V, providing the standard DDR3 bandwidth your desktop chipset expects for everyday multitasking.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00355155BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00418643BTC
En stock