NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
8GB DDR4 2400 CL17 unbuffered DIMM desktop memory module with 1.20V operation
This A-Tech module provides an 8GB DDR4 2400 upgrade for desktop computers. It uses a standard 288-pin DIMM form factor and operates at 1.20V. The memory is designed as a compatible replacement for the G.Skill F4-2400C15D-16GFX kit.
This unbuffered, non-ECC UDIMM suits standard desktop motherboards that accept DDR4 2400 speeds. Systems requiring ECC error correction or registered buffering must select a different module type. Buyers should verify their board supports this specific speed and latency combination.
The module runs at a tested frequency of 2400 with a CAS latency of CL17. This timing value determines whether the stick matches the performance profile required by the target system. Compatibility depends on the motherboard accepting this specific latency at the rated voltage.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for G.Skill |
| Model | F4-2400C15D-16GFX |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | F4-2400C15D-16GFX |
| Recommend Use | Compatible Replacement for G.Skill F4-2400C15D-16GFX |
CL17 is the rated CAS latency at 2400 MHz; the module runs at standard 1.20 V DDR4 voltage without a heat spreader, so latency stays consistent under normal desktop workloads.
The unbuffered DIMM has no heat spreader and operates at 1.20 V, so it generates minimal heat and no audible noise even during continuous use.
A standard desktop DDR4 DIMM slot (288-pin) is needed; the module is non-ECC unbuffered and runs at 1.2 V, matching the DDR4 desktop specification.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?