NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
8GB DDR4 2400 CL17 unbuffered DIMM desktop memory module with 1.20V operation
This A-Tech module provides an 8GB DDR4 2400 upgrade for desktop computers. It uses a standard 288-pin DIMM form factor and operates at 1.20V. The memory is designed as a compatible replacement for the G.Skill F4-2400C15D-16GFX kit.
This unbuffered, non-ECC UDIMM suits standard desktop motherboards that accept DDR4 2400 speeds. Systems requiring ECC error correction or registered buffering must select a different module type. Buyers should verify their board supports this specific speed and latency combination.
The module runs at a tested frequency of 2400 with a CAS latency of CL17. This timing value determines whether the stick matches the performance profile required by the target system. Compatibility depends on the motherboard accepting this specific latency at the rated voltage.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for G.Skill |
| Model | F4-2400C15D-16GFX |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | F4-2400C15D-16GFX |
| Recommend Use | Compatible Replacement for G.Skill F4-2400C15D-16GFX |
CL17 is the rated CAS latency at 2400 MHz; the module runs at standard 1.20 V DDR4 voltage without a heat spreader, so latency stays consistent under normal desktop workloads.
The unbuffered DIMM has no heat spreader and operates at 1.20 V, so it generates minimal heat and no audible noise even during continuous use.
A standard desktop DDR4 DIMM slot (288-pin) is needed; the module is non-ECC unbuffered and runs at 1.2 V, matching the DDR4 desktop specification.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?