NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
A-Tech
8GB DDR4 2400 CL17 unbuffered DIMM desktop memory module with 1.20V operation
This A-Tech module provides an 8GB DDR4 2400 upgrade for desktop computers. It uses a standard 288-pin DIMM form factor and operates at 1.20V. The memory is designed as a compatible replacement for the G.Skill F4-2400C15D-16GFX kit.
This unbuffered, non-ECC UDIMM suits standard desktop motherboards that accept DDR4 2400 speeds. Systems requiring ECC error correction or registered buffering must select a different module type. Buyers should verify their board supports this specific speed and latency combination.
The module runs at a tested frequency of 2400 with a CAS latency of CL17. This timing value determines whether the stick matches the performance profile required by the target system. Compatibility depends on the motherboard accepting this specific latency at the rated voltage.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for G.Skill |
| Model | F4-2400C15D-16GFX |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | F4-2400C15D-16GFX |
| Recommend Use | Compatible Replacement for G.Skill F4-2400C15D-16GFX |
CL17 is the rated CAS latency at 2400 MHz; the module runs at standard 1.20 V DDR4 voltage without a heat spreader, so latency stays consistent under normal desktop workloads.
The unbuffered DIMM has no heat spreader and operates at 1.20 V, so it generates minimal heat and no audible noise even during continuous use.
A standard desktop DDR4 DIMM slot (288-pin) is needed; the module is non-ECC unbuffered and runs at 1.2 V, matching the DDR4 desktop specification.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?