NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
An 8 GB DDR4 2400 MHz unbuffered DIMM with 288 pins, 1.2 V operation and non-ECC design for AMD and Intel desktop systems
This A-Tech module is an 8GB unbuffered DDR4 DIMM running at 2400MHz with a standard 1.2V voltage. It uses a 1Rx8 configuration on a 288-pin form factor and is designed as a compatible replacement for specific Samsung memory parts. The non-ECC stick targets desktop owners who want a straightforward capacity increase.
This memory fits desktop boards that accept non-ECC, unbuffered DDR4 DIMMs at the rated speed and voltage. It will not work in platforms requiring ECC, registered or load-reduced modules, nor in laptop SODIMM slots. Buyers needing error correction or server-grade registered memory should look at a different product class.
The module implements a single-rank 1Rx8 layout, meaning all 8GB reside on one rank of eight 1Gb x8 chips. This organisation affects how the memory controller populates channels and can influence maximum supported capacity per channel on some desktop chipsets. Verify your board's rank and population limits before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Enter the system BIOS or UEFI and open the memory information panel. The module is designed to operate at 1.20V standard DDR4 voltage, so the reported DRAM voltage should read 1.20V and the frequency should show 2400MHz.
The package contains one 8GB DDR4 2400MHz UDIMM in a 288-pin DIMM form factor. No cables, brackets, or additional hardware are included or needed for installation in a standard desktop motherboard slot.
Select the 8GB DDR4 2400MHz PC4-19200 1Rx8 unbuffered DIMM. It matches the Samsung part numbers listed, the 288-pin form factor, the non-ECC specification, and the 1.20V operating voltage exactly.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?