NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
An 8 GB DDR4 2400 MHz unbuffered DIMM with 288 pins, 1.2 V operation and non-ECC design for AMD and Intel desktop systems
This A-Tech module is an 8GB unbuffered DDR4 DIMM running at 2400MHz with a standard 1.2V voltage. It uses a 1Rx8 configuration on a 288-pin form factor and is designed as a compatible replacement for specific Samsung memory parts. The non-ECC stick targets desktop owners who want a straightforward capacity increase.
This memory fits desktop boards that accept non-ECC, unbuffered DDR4 DIMMs at the rated speed and voltage. It will not work in platforms requiring ECC, registered or load-reduced modules, nor in laptop SODIMM slots. Buyers needing error correction or server-grade registered memory should look at a different product class.
The module implements a single-rank 1Rx8 layout, meaning all 8GB reside on one rank of eight 1Gb x8 chips. This organisation affects how the memory controller populates channels and can influence maximum supported capacity per channel on some desktop chipsets. Verify your board's rank and population limits before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Enter the system BIOS or UEFI and open the memory information panel. The module is designed to operate at 1.20V standard DDR4 voltage, so the reported DRAM voltage should read 1.20V and the frequency should show 2400MHz.
The package contains one 8GB DDR4 2400MHz UDIMM in a 288-pin DIMM form factor. No cables, brackets, or additional hardware are included or needed for installation in a standard desktop motherboard slot.
Select the 8GB DDR4 2400MHz PC4-19200 1Rx8 unbuffered DIMM. It matches the Samsung part numbers listed, the 288-pin form factor, the non-ECC specification, and the 1.20V operating voltage exactly.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?