OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
An 8 GB DDR4 2400 MHz unbuffered DIMM with 288 pins, 1.2 V operation and non-ECC design for AMD and Intel desktop systems
This A-Tech module is an 8GB unbuffered DDR4 DIMM running at 2400MHz with a standard 1.2V voltage. It uses a 1Rx8 configuration on a 288-pin form factor and is designed as a compatible replacement for specific Samsung memory parts. The non-ECC stick targets desktop owners who want a straightforward capacity increase.
This memory fits desktop boards that accept non-ECC, unbuffered DDR4 DIMMs at the rated speed and voltage. It will not work in platforms requiring ECC, registered or load-reduced modules, nor in laptop SODIMM slots. Buyers needing error correction or server-grade registered memory should look at a different product class.
The module implements a single-rank 1Rx8 layout, meaning all 8GB reside on one rank of eight 1Gb x8 chips. This organisation affects how the memory controller populates channels and can influence maximum supported capacity per channel on some desktop chipsets. Verify your board's rank and population limits before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Enter the system BIOS or UEFI and open the memory information panel. The module is designed to operate at 1.20V standard DDR4 voltage, so the reported DRAM voltage should read 1.20V and the frequency should show 2400MHz.
The package contains one 8GB DDR4 2400MHz UDIMM in a 288-pin DIMM form factor. No cables, brackets, or additional hardware are included or needed for installation in a standard desktop motherboard slot.
Select the 8GB DDR4 2400MHz PC4-19200 1Rx8 unbuffered DIMM. It matches the Samsung part numbers listed, the 288-pin form factor, the non-ECC specification, and the 1.20V operating voltage exactly.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?