AGI AI818-43 1TB M.2 2280 NVMe internal SSD
- Internal Solid Stat…
- Consumer
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
AGI
A 2 TB internal SSD with a built-in heatsink delivers up to 7400 MB/s read and 6700 MB/s write over PCIe 4.0 x4
Options AI828-2TB
The AGI AI828 is a 2TB internal solid state drive built for gaming PCs and workstations that need fast sequential throughput. It uses a PCIe 4.0 x4 interface and 3D NAND flash to deliver read speeds up to 7400 MB/s and write speeds up to 6700 MB/s. The included heatsink helps sustain performance during heavy workloads.
The drive fits a standard M.2 2280 slot and secures with a single screw; the heatsink adds height so confirm motherboard clearance before fitting. Over-tightening the screw can warp the PCB and cause detection failures. Ensure the slot runs PCIe 4.0 x4 — some boards share lanes with other devices and drop to x2 speeds. Update the system BIOS and enable NVMe support in firmware to avoid the drive disappearing after a cold boot.
Verify the motherboard has an M.2 key-M slot wired for PCIe 4.0 x4 and enough vertical space for the heatsink fins. Confirm the operating temperature range of 0 °C to 70 °C matches your case airflow. The drive is rated for 3000 TBW endurance and 2000000 hours MTBF, so plan workloads accordingly. PS5 users should check Sony’s current firmware requirements for heatsink-equipped drives.
| Max Sequential Read | Up to 7400 MBps |
|---|---|
| Max Sequential Write | Up to 6700 MBps |
| Terabytes Written (TBW) | 3000TB(4TB) |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Interface | PCI-Express 4.0 x4 |
| Memory Components | 3D NAND |
| Protocol | NVMe |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | 15G |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | 5% to~98%RH (Non-condensing) |
| Brand | AGI |
| Series | AI828 |
| Model | AGI2T0G44AI828 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Features | ➠ High quality heatsink ➠ Speed up to 7400MB/s ➠ 4TB ultra-large capacity ➠ Support NVMe1.4 |
| Height | 5.30mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.5g |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The drive uses the standard M.2 2280 form factor with an integrated heatsink. Check your motherboard manual for clearance above the slot; most boards accommodate a finned sink of this height.
Yes. The PCIe 4.0 x4 interface and NVMe protocol meet Sony's requirements, and the included heatsink satisfies the console's cooling mandate.
It guarantees the drive can absorb roughly 3000 TB of total writes. At 2 TB capacity, that equals about 1500 full drive writes over the warranty period.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?