AGI AI818-43 1TB M.2 2280 NVMe internal SSD
- Internal Solid Stat…
- Consumer
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
AGI
A 2 TB internal SSD with a built-in heatsink delivers up to 7400 MB/s read and 6700 MB/s write over PCIe 4.0 x4
Options AI828-2TB
The AGI AI828 is a 2TB internal solid state drive built for gaming PCs and workstations that need fast sequential throughput. It uses a PCIe 4.0 x4 interface and 3D NAND flash to deliver read speeds up to 7400 MB/s and write speeds up to 6700 MB/s. The included heatsink helps sustain performance during heavy workloads.
The drive fits a standard M.2 2280 slot and secures with a single screw; the heatsink adds height so confirm motherboard clearance before fitting. Over-tightening the screw can warp the PCB and cause detection failures. Ensure the slot runs PCIe 4.0 x4 — some boards share lanes with other devices and drop to x2 speeds. Update the system BIOS and enable NVMe support in firmware to avoid the drive disappearing after a cold boot.
Verify the motherboard has an M.2 key-M slot wired for PCIe 4.0 x4 and enough vertical space for the heatsink fins. Confirm the operating temperature range of 0 °C to 70 °C matches your case airflow. The drive is rated for 3000 TBW endurance and 2000000 hours MTBF, so plan workloads accordingly. PS5 users should check Sony’s current firmware requirements for heatsink-equipped drives.
| Max Sequential Read | Up to 7400 MBps |
|---|---|
| Max Sequential Write | Up to 6700 MBps |
| Terabytes Written (TBW) | 3000TB(4TB) |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Interface | PCI-Express 4.0 x4 |
| Memory Components | 3D NAND |
| Protocol | NVMe |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | 15G |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | 5% to~98%RH (Non-condensing) |
| Brand | AGI |
| Series | AI828 |
| Model | AGI2T0G44AI828 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Features | ➠ High quality heatsink ➠ Speed up to 7400MB/s ➠ 4TB ultra-large capacity ➠ Support NVMe1.4 |
| Height | 5.30mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.5g |
Alte versiuni ale acestui model
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
The drive uses the standard M.2 2280 form factor with an integrated heatsink. Check your motherboard manual for clearance above the slot; most boards accommodate a finned sink of this height.
Yes. The PCIe 4.0 x4 interface and NVMe protocol meet Sony's requirements, and the included heatsink satisfies the console's cooling mandate.
It guarantees the drive can absorb roughly 3000 TB of total writes. At 2 TB capacity, that equals about 1500 full drive writes over the warranty period.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?