AGI AI818-43 1TB M.2 2280 NVMe internal SSD
- Internal Solid Stat…
- Consumer
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
AGI
A 2 TB internal SSD with a built-in heatsink delivers up to 7400 MB/s read and 6700 MB/s write over PCIe 4.0 x4
Options AI828-2TB
The AGI AI828 is a 2TB internal solid state drive built for gaming PCs and workstations that need fast sequential throughput. It uses a PCIe 4.0 x4 interface and 3D NAND flash to deliver read speeds up to 7400 MB/s and write speeds up to 6700 MB/s. The included heatsink helps sustain performance during heavy workloads.
The drive fits a standard M.2 2280 slot and secures with a single screw; the heatsink adds height so confirm motherboard clearance before fitting. Over-tightening the screw can warp the PCB and cause detection failures. Ensure the slot runs PCIe 4.0 x4 — some boards share lanes with other devices and drop to x2 speeds. Update the system BIOS and enable NVMe support in firmware to avoid the drive disappearing after a cold boot.
Verify the motherboard has an M.2 key-M slot wired for PCIe 4.0 x4 and enough vertical space for the heatsink fins. Confirm the operating temperature range of 0 °C to 70 °C matches your case airflow. The drive is rated for 3000 TBW endurance and 2000000 hours MTBF, so plan workloads accordingly. PS5 users should check Sony’s current firmware requirements for heatsink-equipped drives.
| Max Sequential Read | Up to 7400 MBps |
|---|---|
| Max Sequential Write | Up to 6700 MBps |
| Terabytes Written (TBW) | 3000TB(4TB) |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Interface | PCI-Express 4.0 x4 |
| Memory Components | 3D NAND |
| Protocol | NVMe |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | 15G |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | 5% to~98%RH (Non-condensing) |
| Brand | AGI |
| Series | AI828 |
| Model | AGI2T0G44AI828 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Features | ➠ High quality heatsink ➠ Speed up to 7400MB/s ➠ 4TB ultra-large capacity ➠ Support NVMe1.4 |
| Height | 5.30mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.5g |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The drive uses the standard M.2 2280 form factor with an integrated heatsink. Check your motherboard manual for clearance above the slot; most boards accommodate a finned sink of this height.
Yes. The PCIe 4.0 x4 interface and NVMe protocol meet Sony's requirements, and the included heatsink satisfies the console's cooling mandate.
It guarantees the drive can absorb roughly 3000 TB of total writes. At 2 TB capacity, that equals about 1500 full drive writes over the warranty period.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?