BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Athena Power
1U rackmount chassis holds a Mini-ITX board with eight 40 mm fans and a 300 W 80PLUS Bronze power supply
The Athena Power RM-1U100DD308 is a 1U rackmount server chassis built for Mini-ITX motherboards measuring 6.7 by 6.7 inches. It includes a 300W FLEX ATX power supply with 80PLUS Bronze efficiency and fits a standard 19-inch rack. This unit suits integrators deploying compact servers or network appliances in data-centre racks.
The chassis uses an aluminum front panel and 1.2mm steel construction with four front 40mm intake fans and four side 40mm exhaust fans pre-installed. A washable air filter covers the front intake. Builders must route cables carefully in the 15.25-inch depth; the dense 40mm fan array can be loud under load and leaves little room for tall CPU coolers or full-height expansion cards.
The included 300W FLEX ATX supply limits total system power to 300 watts at 80PLUS Bronze efficiency, so high-TDP processors or multiple drives may exceed the budget. Only two USB 2.0 ports are available on the front panel. The 1U height restricts cooler height and prevents standard ATX power supplies, making component selection critical for thermal and electrical headroom.
| Brand | Athena Power |
|---|---|
| Model | RM-1U100DD308 |
| Chassis Type | Rackmount |
| Form Factor | 1U |
| Color | Black |
| Case Material | Aluminum Front Panel and 1.2mm Steel |
| Motherboard Compatibility | Mini-ITX (6.7x6.7) |
| Power Supply | 300W FLEX ATX, 80PLUS Bronze |
| Front Ports | 2 x USB 2.0 |
| 40mm Fans | 8 |
| Features | 19" Rackmount standard Air Filter: Washable Switch: Power On/Off, Reset Cooling Fan: 40mm Intake x 4 (Front) 40mm Exhaust x 4 (Side) Indicators: LED for Power and HDD With AP-MFATX30P8. |
| Dimensions | 19" x 1.75" x 15.25" (W x H x D) |
| Weight | 15.00lb |
| Szállítási súly | 8.64 kg |
| Csomagméret | 572 × 527 × 203 mm |
The front panel LEDs for power and hard-drive activity will light up, and the eight 40mm fans — four intake at the front and four exhaust at the side — should spin audibly when the system is running.
The chassis includes the aluminum front panel, 1.2mm steel body, eight pre-installed 40mm fans, washable air filter, 300W 80PLUS Bronze FLEX ATX supply (model AP-MFATX30P8), power and reset switches, and two front USB 2.0 ports. A Mini-ITX motherboard, CPU, memory, and storage are not included.
RM-1U100DD308 is the single SKU for this 1U rackmount case with the 300W Bronze supply and eight 40mm fans; no alternate capacity or feature variants are listed under this model.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?