BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.
Athena Power
1U rackmount chassis holds a Mini-ITX board with eight 40 mm fans and a 300 W 80PLUS Bronze power supply
The Athena Power RM-1U100DD308 is a 1U rackmount server chassis built for Mini-ITX motherboards measuring 6.7 by 6.7 inches. It includes a 300W FLEX ATX power supply with 80PLUS Bronze efficiency and fits a standard 19-inch rack. This unit suits integrators deploying compact servers or network appliances in data-centre racks.
The chassis uses an aluminum front panel and 1.2mm steel construction with four front 40mm intake fans and four side 40mm exhaust fans pre-installed. A washable air filter covers the front intake. Builders must route cables carefully in the 15.25-inch depth; the dense 40mm fan array can be loud under load and leaves little room for tall CPU coolers or full-height expansion cards.
The included 300W FLEX ATX supply limits total system power to 300 watts at 80PLUS Bronze efficiency, so high-TDP processors or multiple drives may exceed the budget. Only two USB 2.0 ports are available on the front panel. The 1U height restricts cooler height and prevents standard ATX power supplies, making component selection critical for thermal and electrical headroom.
| Brand | Athena Power |
|---|---|
| Model | RM-1U100DD308 |
| Chassis Type | Rackmount |
| Form Factor | 1U |
| Color | Black |
| Case Material | Aluminum Front Panel and 1.2mm Steel |
| Motherboard Compatibility | Mini-ITX (6.7x6.7) |
| Power Supply | 300W FLEX ATX, 80PLUS Bronze |
| Front Ports | 2 x USB 2.0 |
| 40mm Fans | 8 |
| Features | 19" Rackmount standard Air Filter: Washable Switch: Power On/Off, Reset Cooling Fan: 40mm Intake x 4 (Front) 40mm Exhaust x 4 (Side) Indicators: LED for Power and HDD With AP-MFATX30P8. |
| Dimensions | 19" x 1.75" x 15.25" (W x H x D) |
| Weight | 15.00lb |
| Berat penghantaran | 8.64 kg |
| Dimensi bungkusan | 572 × 527 × 203 mm |
The front panel LEDs for power and hard-drive activity will light up, and the eight 40mm fans — four intake at the front and four exhaust at the side — should spin audibly when the system is running.
The chassis includes the aluminum front panel, 1.2mm steel body, eight pre-installed 40mm fans, washable air filter, 300W 80PLUS Bronze FLEX ATX supply (model AP-MFATX30P8), power and reset switches, and two front USB 2.0 ports. A Mini-ITX motherboard, CPU, memory, and storage are not included.
RM-1U100DD308 is the single SKU for this 1U rackmount case with the 300W Bronze supply and eight 40mm fans; no alternate capacity or feature variants are listed under this model.
Juga di rak ini
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
Apa yang anda hantar untuk membayar, dan mata wang yang anda guna untuk membaca harga.
Dihantar daripada dompet anda semasa semak keluar
Untuk paparan sahaja — katalog diberi harga dalam USD
Tiada mata wang yang sepadan.
Pilih bahasa yang digunakan oleh laman web ini.
Tiada bahasa yang sepadan.
Pengguna baharu?
Sudah mempunyai akaun?
Tiada set semula automatik: kedai ini tidak menghantar sebarang e-mel, jadi tiada pautan sekali guna untuk diminta. Biarkan alamat pada akaun tersebut, ia akan diuruskan secara manual.
Permintaan direkodkan
Tiada apa-apa akan sampai ke peti masuk anda — kedai ini tidak menghantar sebarang e-mel. Seseorang akan menguruskannya secara manual.
Sudah teringat?