BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Athena Power
1U rackmount chassis holds a Mini-ITX board with eight 40 mm fans and a 300 W 80PLUS Bronze power supply
The Athena Power RM-1U100DD308 is a 1U rackmount server chassis built for Mini-ITX motherboards measuring 6.7 by 6.7 inches. It includes a 300W FLEX ATX power supply with 80PLUS Bronze efficiency and fits a standard 19-inch rack. This unit suits integrators deploying compact servers or network appliances in data-centre racks.
The chassis uses an aluminum front panel and 1.2mm steel construction with four front 40mm intake fans and four side 40mm exhaust fans pre-installed. A washable air filter covers the front intake. Builders must route cables carefully in the 15.25-inch depth; the dense 40mm fan array can be loud under load and leaves little room for tall CPU coolers or full-height expansion cards.
The included 300W FLEX ATX supply limits total system power to 300 watts at 80PLUS Bronze efficiency, so high-TDP processors or multiple drives may exceed the budget. Only two USB 2.0 ports are available on the front panel. The 1U height restricts cooler height and prevents standard ATX power supplies, making component selection critical for thermal and electrical headroom.
| Brand | Athena Power |
|---|---|
| Model | RM-1U100DD308 |
| Chassis Type | Rackmount |
| Form Factor | 1U |
| Color | Black |
| Case Material | Aluminum Front Panel and 1.2mm Steel |
| Motherboard Compatibility | Mini-ITX (6.7x6.7) |
| Power Supply | 300W FLEX ATX, 80PLUS Bronze |
| Front Ports | 2 x USB 2.0 |
| 40mm Fans | 8 |
| Features | 19" Rackmount standard Air Filter: Washable Switch: Power On/Off, Reset Cooling Fan: 40mm Intake x 4 (Front) 40mm Exhaust x 4 (Side) Indicators: LED for Power and HDD With AP-MFATX30P8. |
| Dimensions | 19" x 1.75" x 15.25" (W x H x D) |
| Weight | 15.00lb |
| Lähetyspaino | 8.64 kg |
| Pakkauksen mitat | 572 × 527 × 203 mm |
The front panel LEDs for power and hard-drive activity will light up, and the eight 40mm fans — four intake at the front and four exhaust at the side — should spin audibly when the system is running.
The chassis includes the aluminum front panel, 1.2mm steel body, eight pre-installed 40mm fans, washable air filter, 300W 80PLUS Bronze FLEX ATX supply (model AP-MFATX30P8), power and reset switches, and two front USB 2.0 ports. A Mini-ITX motherboard, CPU, memory, and storage are not included.
RM-1U100DD308 is the single SKU for this 1U rackmount case with the 300W Bronze supply and eight 40mm fans; no alternate capacity or feature variants are listed under this model.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?