Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Axiom dual-port SFP+ network card silver bracket two optical ports PCB visible

Axiom

Axiom 540-BBDR-AX 10GBase-X dual-port SFP+ network card

SKU CH-4QB6-WCV5Q MPN 540-BBDR-AX

Dual-port 10GBase-X SFP+ card with PCI Express 2.0 x8 host interface for optical fibre server connections

  • Weight0.24
  • Dual 10 GbE ports over optical fiber for high-speed server links
  • PCI Express 2.0 x8 host interface delivers dedicated bandwidth
  • Two SFP+ cages accept a range of transceiver modules
  • Low-profile 6.5" × 2.7" form factor fits dense chassis
  • Lightweight 3.84 oz design reduces mechanical stress on the slot

Dual-Port 10GBase-X SFP+ NIC

The Axiom 540-BBDR-AX is a dual-port network interface card built for servers that require 10GBase-X connectivity over optical fibre. It installs into a PCI Express 2.0 x8 slot and presents two SFP+ cages for compatible transceiver modules. This card targets administrators upgrading rack-mount or tower servers to 10 GbE links without changing existing fibre infrastructure.

Low-Profile Passive Cooling

The card uses a passive heatsink that fits within a 0.5 inch slot thickness, drawing power solely from the PCI Express bus. No onboard fan means silent operation inside noise-sensitive server rooms. Typical power draw remains within the PCIe 2.0 x8 envelope, so additional auxiliary power cables are not required for normal operation.

Plug-In Form Factor for Dense Servers

Measuring 6.5 inches by 2.7 inches, the plug-in card fits standard low-profile brackets in 1U and 2U chassis. Dual SFP+ ports allow link aggregation or separate uplink and downlink paths using LC duplex optics. Transceivers and patch cords are sold separately, so verify wavelength and reach requirements before deployment.

Erősségek

  • Dual 10 GbE ports over optical fiber for high-speed server links
  • PCI Express 2.0 x8 host interface delivers dedicated bandwidth
  • Two SFP+ cages accept a range of transceiver modules
  • Low-profile 6.5" × 2.7" form factor fits dense chassis
  • Lightweight 3.84 oz design reduces mechanical stress on the slot

Műszaki adatok

BrandAXIOM MEMORY
Weight0.24
Szállítási súly0.11 kg
Csomagméret165 × 68 × 13 mm

Kérdések a termékről

How do I install this PCI Express 2.0 x8 card in my server?

Insert the card into an available PCIe x8 or wider slot, secure the bracket, then plug compatible SFP+ optical transceivers into the two ports before cabling.

What maintenance or replacement will the SFP+ transceivers need later?

The card uses hot-swappable SFP+ modules; replace a transceiver if link errors appear or when upgrading to a different fiber type or reach.

What limit appears first under sustained 10GBase-X traffic?

The PCI Express 2.0 x8 host interface caps theoretical throughput at roughly 40 Gbit/s, so the two 10 Gbit/s ports can run line-rate simultaneously.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.