Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Axiom dual-port SFP+ network card silver bracket two optical ports PCB visible

Axiom

Axiom 540-BBDR-AX 10GBase-X dual-port SFP+ network card

SKU CH-4QB6-WCV5Q MPN 540-BBDR-AX

Dual-port 10GBase-X SFP+ card with PCI Express 2.0 x8 host interface for optical fibre server connections

  • Weight0.24
  • Dual 10 GbE ports over optical fiber for high-speed server links
  • PCI Express 2.0 x8 host interface delivers dedicated bandwidth
  • Two SFP+ cages accept a range of transceiver modules
  • Low-profile 6.5" × 2.7" form factor fits dense chassis
  • Lightweight 3.84 oz design reduces mechanical stress on the slot

Dual-Port 10GBase-X SFP+ NIC

The Axiom 540-BBDR-AX is a dual-port network interface card built for servers that require 10GBase-X connectivity over optical fibre. It installs into a PCI Express 2.0 x8 slot and presents two SFP+ cages for compatible transceiver modules. This card targets administrators upgrading rack-mount or tower servers to 10 GbE links without changing existing fibre infrastructure.

Low-Profile Passive Cooling

The card uses a passive heatsink that fits within a 0.5 inch slot thickness, drawing power solely from the PCI Express bus. No onboard fan means silent operation inside noise-sensitive server rooms. Typical power draw remains within the PCIe 2.0 x8 envelope, so additional auxiliary power cables are not required for normal operation.

Plug-In Form Factor for Dense Servers

Measuring 6.5 inches by 2.7 inches, the plug-in card fits standard low-profile brackets in 1U and 2U chassis. Dual SFP+ ports allow link aggregation or separate uplink and downlink paths using LC duplex optics. Transceivers and patch cords are sold separately, so verify wavelength and reach requirements before deployment.

Puncte forte

  • Dual 10 GbE ports over optical fiber for high-speed server links
  • PCI Express 2.0 x8 host interface delivers dedicated bandwidth
  • Two SFP+ cages accept a range of transceiver modules
  • Low-profile 6.5" × 2.7" form factor fits dense chassis
  • Lightweight 3.84 oz design reduces mechanical stress on the slot

Specificații

BrandAXIOM MEMORY
Weight0.24
Greutate la expediere0.11 kg
Dimensiunile coletului165 × 68 × 13 mm

Întrebări despre acest articol

How do I install this PCI Express 2.0 x8 card in my server?

Insert the card into an available PCIe x8 or wider slot, secure the bracket, then plug compatible SFP+ optical transceivers into the two ports before cabling.

What maintenance or replacement will the SFP+ transceivers need later?

The card uses hot-swappable SFP+ modules; replace a transceiver if link errors appear or when upgrading to a different fiber type or reach.

What limit appears first under sustained 10GBase-X traffic?

The PCI Express 2.0 x8 host interface caps theoretical throughput at roughly 40 Gbit/s, so the two 10 Gbit/s ports can run line-rate simultaneously.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.