Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Axiom dual-port SFP+ network card silver bracket two optical ports PCB visible

Axiom

Axiom 540-BBDR-AX 10GBase-X dual-port SFP+ network card

SKU CH-4QB6-WCV5Q MPN 540-BBDR-AX

Dual-port 10GBase-X SFP+ card with PCI Express 2.0 x8 host interface for optical fibre server connections

  • Weight0.24
  • Dual 10 GbE ports over optical fiber for high-speed server links
  • PCI Express 2.0 x8 host interface delivers dedicated bandwidth
  • Two SFP+ cages accept a range of transceiver modules
  • Low-profile 6.5" × 2.7" form factor fits dense chassis
  • Lightweight 3.84 oz design reduces mechanical stress on the slot

Dual-Port 10GBase-X SFP+ NIC

The Axiom 540-BBDR-AX is a dual-port network interface card built for servers that require 10GBase-X connectivity over optical fibre. It installs into a PCI Express 2.0 x8 slot and presents two SFP+ cages for compatible transceiver modules. This card targets administrators upgrading rack-mount or tower servers to 10 GbE links without changing existing fibre infrastructure.

Low-Profile Passive Cooling

The card uses a passive heatsink that fits within a 0.5 inch slot thickness, drawing power solely from the PCI Express bus. No onboard fan means silent operation inside noise-sensitive server rooms. Typical power draw remains within the PCIe 2.0 x8 envelope, so additional auxiliary power cables are not required for normal operation.

Plug-In Form Factor for Dense Servers

Measuring 6.5 inches by 2.7 inches, the plug-in card fits standard low-profile brackets in 1U and 2U chassis. Dual SFP+ ports allow link aggregation or separate uplink and downlink paths using LC duplex optics. Transceivers and patch cords are sold separately, so verify wavelength and reach requirements before deployment.

Helstu kostir

  • Dual 10 GbE ports over optical fiber for high-speed server links
  • PCI Express 2.0 x8 host interface delivers dedicated bandwidth
  • Two SFP+ cages accept a range of transceiver modules
  • Low-profile 6.5" × 2.7" form factor fits dense chassis
  • Lightweight 3.84 oz design reduces mechanical stress on the slot

Tæknilýsing

BrandAXIOM MEMORY
Weight0.24
Sendingarþyngd0.11 kg
Stærð sendingar165 × 68 × 13 mm

Spurningar um þessa vöru

How do I install this PCI Express 2.0 x8 card in my server?

Insert the card into an available PCIe x8 or wider slot, secure the bracket, then plug compatible SFP+ optical transceivers into the two ports before cabling.

What maintenance or replacement will the SFP+ transceivers need later?

The card uses hot-swappable SFP+ modules; replace a transceiver if link errors appear or when upgrading to a different fiber type or reach.

What limit appears first under sustained 10GBase-X traffic?

The PCI Express 2.0 x8 host interface caps theoretical throughput at roughly 40 Gbit/s, so the two 10 Gbit/s ports can run line-rate simultaneously.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.