Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green PCB network card with dual Ethernet ports and silver bracket

Mellanox Technologies

Mellanox Technologies MCX314A-BCCT ConnectX-3 EN 56 Gigabit Ethernet network card

SKU CH-WKJQ-0K47Z

Dual-port 56 Gigabit Ethernet adapter with PCI Express 3.0 x8 interface for high-throughput server and storage workloads

  • Delivers 56 Gigabit Ethernet bandwidth for high-throughput server workloads
  • PCI Express 3.0 x8 interface enables low-latency data movement
  • Dual-port design supports I/O consolidation in virtualised environments
  • Integrated TCP/UDP/IP and iSCSI offload reduces CPU transport load
  • Compact PCB footprint with power-saving monitors lowers total system power usage

Single-port 56 GbE adapter for servers

The Mellanox ConnectX-3 EN MCX314A-BCCT is a single-port network card delivering 56 Gigabit Ethernet over a PCI Express 3.0 x8 interface. It targets enterprise servers and storage platforms that need high-throughput, low-latency connectivity for clustered databases, web infrastructure or high-frequency trading workloads. Integrated PHYs and a compact PCB suit blade and LAN-on-motherboard designs while power-saving features reduce total system draw.

Suited for PCIe 3.0 slots needing one 56 GbE link

This card fits builds that have an available PCI Express 3.0 x8 slot and require a single 56 GbE connection with TCP/UDP/IP and iSCSI offload. Buyers needing dual ports, a different port speed or a form factor other than a standard add-in card should look at something else. Environments without PCIe 3.0 support cannot use the adapter at its rated performance.

PCI Express 3.0 x8 interface decides compatibility

The adapter connects through a PCI Express 3.0 x8 edge connector, so the host system must provide that exact slot type and electrical width. Verifying the slot before purchase is the single specification that determines whether this is the right part.

Helstu kostir

  • Delivers 56 Gigabit Ethernet bandwidth for high-throughput server workloads
  • PCI Express 3.0 x8 interface enables low-latency data movement
  • Dual-port design supports I/O consolidation in virtualised environments
  • Integrated TCP/UDP/IP and iSCSI offload reduces CPU transport load
  • Compact PCB footprint with power-saving monitors lowers total system power usage

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

Does the MCX314A-BCCT fit a standard PCI Express 3.0 x8 slot?

Yes, the card uses a PCI Express 3.0 x8 edge connector and will seat in any compliant x8 or wider slot.

What is the common mistake when installing the ConnectX-3 EN adapter?

Inserting the card into an x4 or x1 slot, which mechanically fits but limits the link to four or one lanes and cuts the 56 Gigabit throughput.

When should the SFP+ transceivers in the dual ports be replaced?

Replace a transceiver if link lights fail, error counters climb, or the module runs unusually hot during sustained 56 Gigabit traffic.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.