暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green PCB network card with dual Ethernet ports and silver bracket

Mellanox Technologies

Mellanox Technologies MCX314A-BCCT ConnectX-3 EN 56 Gigabit Ethernet network card

SKU CH-WKJQ-0K47Z

Dual-port 56 Gigabit Ethernet adapter with PCI Express 3.0 x8 interface for high-throughput server and storage workloads

  • Delivers 56 Gigabit Ethernet bandwidth for high-throughput server workloads
  • PCI Express 3.0 x8 interface enables low-latency data movement
  • Dual-port design supports I/O consolidation in virtualised environments
  • Integrated TCP/UDP/IP and iSCSI offload reduces CPU transport load
  • Compact PCB footprint with power-saving monitors lowers total system power usage

Single-port 56 GbE adapter for servers

The Mellanox ConnectX-3 EN MCX314A-BCCT is a single-port network card delivering 56 Gigabit Ethernet over a PCI Express 3.0 x8 interface. It targets enterprise servers and storage platforms that need high-throughput, low-latency connectivity for clustered databases, web infrastructure or high-frequency trading workloads. Integrated PHYs and a compact PCB suit blade and LAN-on-motherboard designs while power-saving features reduce total system draw.

Suited for PCIe 3.0 slots needing one 56 GbE link

This card fits builds that have an available PCI Express 3.0 x8 slot and require a single 56 GbE connection with TCP/UDP/IP and iSCSI offload. Buyers needing dual ports, a different port speed or a form factor other than a standard add-in card should look at something else. Environments without PCIe 3.0 support cannot use the adapter at its rated performance.

PCI Express 3.0 x8 interface decides compatibility

The adapter connects through a PCI Express 3.0 x8 edge connector, so the host system must provide that exact slot type and electrical width. Verifying the slot before purchase is the single specification that determines whether this is the right part.

特長

  • Delivers 56 Gigabit Ethernet bandwidth for high-throughput server workloads
  • PCI Express 3.0 x8 interface enables low-latency data movement
  • Dual-port design supports I/O consolidation in virtualised environments
  • Integrated TCP/UDP/IP and iSCSI offload reduces CPU transport load
  • Compact PCB footprint with power-saving monitors lowers total system power usage

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does the MCX314A-BCCT fit a standard PCI Express 3.0 x8 slot?

Yes, the card uses a PCI Express 3.0 x8 edge connector and will seat in any compliant x8 or wider slot.

What is the common mistake when installing the ConnectX-3 EN adapter?

Inserting the card into an x4 or x1 slot, which mechanically fits but limits the link to four or one lanes and cuts the 56 Gigabit throughput.

When should the SFP+ transceivers in the dual ports be replaced?

Replace a transceiver if link lights fail, error counters climb, or the module runs unusually hot during sustained 56 Gigabit traffic.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。