Bitspower Notos 120mm DRGB Case Fan 1800 RPM 59 CFM 28 dBA 25mm Black White
- 1 Fan
- Case Fan
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Bitspower
A 120 mm PWM case fan with addressable RGB lighting, 800–1800 RPM speed range, 41–44 CFM airflow and 25–28 dBA noise
Color Black
Az áthúzott konfigurációk léteznek, de nem érhetők el itt.
Model Notos Xtal Fan
Az áthúzott konfigurációk léteznek, de nem érhetők el itt.
Option 1 Pack
Az áthúzott konfigurációk léteznek, de nem érhetők el itt.
This 120 mm case fan uses a diamond-cut frame and addressable DRGB lighting to deliver both airflow and visual flair. It suits builders who want coordinated lighting across a loop or air-cooled chassis. The single-fan pack fits standard 120 mm mounting points and connects via a 4-pin PWM header for speed control.
PWM control lets the fan spin between 800 and 1800 RPM, moving 41 to 44 CFM at peak while keeping noise at 25 dBA typical and 28 dBA maximum. Vibration-cancelling rubber pads on all four corners reduce rattling during long sessions. The motor runs on 12 V DC between 7 V and 13.2 V, with LEDs powered separately at 5 V.
A 4-pin PWM connector and a separate 5 V DRGB header are required; the RGB interface supports daisy-chaining multiple fans for cleaner cabling. Certified compatibility with ASUS Aura Sync, Gigabyte RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome, Biostar Vivid LED DJ and Razer Chroma enables unified software control. The 25 mm thickness fits most radiator and case fan slots without clearance issues.
| Brand | Bitspower |
|---|---|
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| RPM | 800~1800 RPM±10% |
| Air Flow | 41-44 CFM(Max.) |
| Noise Level | 25dba Max:28dba |
| Power Connector | 4 Pin |
| Color | Black |
| LED | DRGB |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Mount the fan using the four included vibration-cancelling rubber pads on each corner, then connect the 4-pin PWM cable to the motherboard fan header and the 5 V DRGB cable to a 5 V addressable RGB header; the step often missed is plugging the DRGB cable into a 12 V RGB header, which will not work.
Periodically clean dust from the blades and frame with compressed air; the sleeve bearing is not user-serviceable, so if noise or speed drift appears after long use the whole fan must be replaced.
At the maximum 1800 RPM the fan reaches its rated 28 dBA noise ceiling and 44 CFM airflow limit; running continuously at that speed will hit the acoustic and thermal ceiling before any voltage or RPM headroom is exhausted.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?