Bitspower Notos 120mm DRGB Case Fan 1800 RPM 59 CFM 28 dBA 25mm Black White
- 1 Fan
- Case Fan
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Bitspower
A 120 mm PWM case fan with addressable RGB lighting, 800–1800 RPM speed range, 41–44 CFM airflow and 25–28 dBA noise
Color Black
Preškrtnuté verzie existujú, ale nie sú tu skladom.
Model Notos Xtal Fan
Preškrtnuté verzie existujú, ale nie sú tu skladom.
Option 1 Pack
Preškrtnuté verzie existujú, ale nie sú tu skladom.
This 120 mm case fan uses a diamond-cut frame and addressable DRGB lighting to deliver both airflow and visual flair. It suits builders who want coordinated lighting across a loop or air-cooled chassis. The single-fan pack fits standard 120 mm mounting points and connects via a 4-pin PWM header for speed control.
PWM control lets the fan spin between 800 and 1800 RPM, moving 41 to 44 CFM at peak while keeping noise at 25 dBA typical and 28 dBA maximum. Vibration-cancelling rubber pads on all four corners reduce rattling during long sessions. The motor runs on 12 V DC between 7 V and 13.2 V, with LEDs powered separately at 5 V.
A 4-pin PWM connector and a separate 5 V DRGB header are required; the RGB interface supports daisy-chaining multiple fans for cleaner cabling. Certified compatibility with ASUS Aura Sync, Gigabyte RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome, Biostar Vivid LED DJ and Razer Chroma enables unified software control. The 25 mm thickness fits most radiator and case fan slots without clearance issues.
| Brand | Bitspower |
|---|---|
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| RPM | 800~1800 RPM±10% |
| Air Flow | 41-44 CFM(Max.) |
| Noise Level | 25dba Max:28dba |
| Power Connector | 4 Pin |
| Color | Black |
| LED | DRGB |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Mount the fan using the four included vibration-cancelling rubber pads on each corner, then connect the 4-pin PWM cable to the motherboard fan header and the 5 V DRGB cable to a 5 V addressable RGB header; the step often missed is plugging the DRGB cable into a 12 V RGB header, which will not work.
Periodically clean dust from the blades and frame with compressed air; the sleeve bearing is not user-serviceable, so if noise or speed drift appears after long use the whole fan must be replaced.
At the maximum 1800 RPM the fan reaches its rated 28 dBA noise ceiling and 44 CFM airflow limit; running continuously at that speed will hit the acoustic and thermal ceiling before any voltage or RPM headroom is exhausted.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?