Bitspower Notos 120mm DRGB Case Fan 1800 RPM 59 CFM 28 dBA 25mm Black White
- 1 Fan
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Bitspower
A 120 mm PWM case fan with addressable RGB lighting, 800–1800 RPM speed range, 41–44 CFM airflow and 25–28 dBA noise
Color Black
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
Model Notos Xtal Fan
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
Option 1 Pack
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
This 120 mm case fan uses a diamond-cut frame and addressable DRGB lighting to deliver both airflow and visual flair. It suits builders who want coordinated lighting across a loop or air-cooled chassis. The single-fan pack fits standard 120 mm mounting points and connects via a 4-pin PWM header for speed control.
PWM control lets the fan spin between 800 and 1800 RPM, moving 41 to 44 CFM at peak while keeping noise at 25 dBA typical and 28 dBA maximum. Vibration-cancelling rubber pads on all four corners reduce rattling during long sessions. The motor runs on 12 V DC between 7 V and 13.2 V, with LEDs powered separately at 5 V.
A 4-pin PWM connector and a separate 5 V DRGB header are required; the RGB interface supports daisy-chaining multiple fans for cleaner cabling. Certified compatibility with ASUS Aura Sync, Gigabyte RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome, Biostar Vivid LED DJ and Razer Chroma enables unified software control. The 25 mm thickness fits most radiator and case fan slots without clearance issues.
| Brand | Bitspower |
|---|---|
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| RPM | 800~1800 RPM±10% |
| Air Flow | 41-44 CFM(Max.) |
| Noise Level | 25dba Max:28dba |
| Power Connector | 4 Pin |
| Color | Black |
| LED | DRGB |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Mount the fan using the four included vibration-cancelling rubber pads on each corner, then connect the 4-pin PWM cable to the motherboard fan header and the 5 V DRGB cable to a 5 V addressable RGB header; the step often missed is plugging the DRGB cable into a 12 V RGB header, which will not work.
Periodically clean dust from the blades and frame with compressed air; the sleeve bearing is not user-serviceable, so if noise or speed drift appears after long use the whole fan must be replaced.
At the maximum 1800 RPM the fan reaches its rated 28 dBA noise ceiling and 44 CFM airflow limit; running continuously at that speed will hit the acoustic and thermal ceiling before any voltage or RPM headroom is exhausted.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?