Bitspower Touchaqua Notos Xtal 120mm DRGB Case Fan
- 1 Fan
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Bitspower
120 mm PWM fan delivers 59 CFM at 1800 RPM with 28 dBA noise and addressable RGB lighting
Color Black / White
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
Model Notos Fan
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
Option 1 Pack
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
The Bitspower Notos is a single 120 mm case fan with a 25 mm frame and hydro bearing. It spins up to 1800 RPM and delivers 59 CFM airflow at 1.2 mm/H2O static pressure. The unit is aimed at builders who want addressable RGB lighting and PWM speed control for chassis, CPU cooler or radiator mounting.
Digital RGB LEDs sit around the centre shaft and require a 5 V 3-pin motherboard header or compatible controller. The RGB interface can be daisy-chained between fans and is certified for ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome and Razer Chroma. A 550 mm cable allows flexible routing inside the case.
The fan uses a standard 4-pin PWM power connector for automatic speed regulation. Vibration-cancelling rubber pads are fitted on all four corners. Before ordering, verify that your case or radiator has 120 mm mounting holes and enough depth for the 25 mm thickness. The addressable RGB header must be 5 V 3-pin, not 12 V 4-pin.
| Brand | bitspower |
|---|---|
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | 1800RPM |
| Air Flow | 59 CFM |
| Air Pressure | 1.2 mm/H2O |
| Noise Level | 28 dBA |
| Power Connector | 4 Pin |
| Color | Black / White |
| LED | DRGB |
| Dimensions | 120 x 120 x 25 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The hydro bearing is self-lubricating and designed for continuous operation without a scheduled replacement interval under normal use.
The fan delivers 59 CFM airflow at 1.2 mm/H2O static pressure; sustained loads will hit the static-pressure ceiling before airflow becomes the bottleneck.
At maximum speed it produces 28 dBA noise; vibration-cancelling rubber pads on all four corners keep rattling absent during extended operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?