Bitspower Notos 120mm DRGB Case Fan 1800 RPM 59 CFM 28 dBA 25mm Black White
- 1 Fan
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Bitspower
Three 120 mm PWM fans with addressable RGB lighting and vibration-damping corners, 800–1800 RPM, 41–44 CFM, 25–28 dBA, plus an RF remote hub
Color Black
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
Model Notos Xtal Fan
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
Option 3 Packs
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
This pack contains three Bitspower Touchaqua Notos Xtal 120mm fans with digital RGB lighting. Each unit measures 120mm by 120mm by 25mm and spins between 800 and 1800 RPM. The kit includes a radio-frequency remote controller hub for lighting management. It suits builders assembling a custom water-cooling loop or upgrading case airflow.
Verify that your motherboard or controller offers enough 4-pin PWM headers for three fans or that you have a suitable splitter. Confirm 120mm mounting points are available on your radiator or case panels. The fans use a standard 25mm thickness, so ensure no clearance conflicts with nearby components or side panels.
Digital RGB LEDs sit around the frame and can be daisy-chained for cable reduction. The lighting is certified for ASUS AURA Sync, GIGABYTE RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome, Biostar VIVID LED DJ and Razer Chroma. Rubber pads on all four corners suppress vibration noise during operation. Builders needing fans larger than 120mm or without PWM control should look elsewhere.
| Brand | Bitspower |
|---|---|
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| RPM | 800~1800 RPM±10% |
| Air Flow | 41-44 CFM(Max.) |
| Noise Level | 25 - 28dbA |
| Color | Black |
| LED | DRGB |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The pack contains three 120 mm fans, a digital RGB RF remote controller hub and vibration-damping rubber pads for each corner. No extra cables or controllers are required for PWM speed control or daisy-chained lighting.
Only one version is sold: a black three-fan kit with 120 mm diameter, 25 mm thickness and addressable DRGB LEDs. There are no alternative colour, size or single-fan options in this range.
At full PWM duty the fans spin up to 1800 RPM, moving 41-44 CFM while staying between 25-28 dBA. Speed drops to 800 RPM at minimum duty for quieter operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?