Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green 240-pin DDR3 DIMM modules with black chips

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1600 ECC Unregistered DIMM Supermicro X10SLL-F X10SLL+-F X10SLH-F

SKU CH-1A3D-AQ4S9

8GB dual-channel DDR3-1600 ECC kit with CL11 timing for Supermicro X10SLL series motherboards

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • ECC protection prevents data corruption in critical workloads
  • 1600 MHz DDR3 speed matches board specification
  • Dual-channel 2 x 4 GB kit enables full bandwidth
  • 5 V standard voltage ensures stable operation
  • Guaranteed compatible with Supermicro X10SLL-F, X10SLL+-F, X10SLH-F

8GB DDR3 ECC kit for Supermicro X10SLL-F boards

This 8GB kit contains two 4GB unregistered DIMMs built for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F motherboards. It targets server and workstation builders who need error-correcting memory on these specific platforms. The modules run at DDR3 1600 with CL11 timing and 1.5V operation.

Straightforward DIMM installation

The 240-pin DIMMs install like standard desktop memory by seating them in the board’s four DIMM sockets. No registration step or special tooling is required. The only variable is the heat spreader: current inventory determines whether the sticks ship with one, so confirm that requirement before ordering if clearance is tight.

Verify board model and memory limits before ordering

Ensure the motherboard is exactly one of the three listed Supermicro models; other X10 boards are not covered by the compatibility guarantee. The platform supports up to 32GB total across its four sockets in 1GB, 2GB, 4GB or 8GB DIMM sizes at 1.5V. This kit adds 8GB toward that ceiling.

Erősségek

  • ECC protection prevents data corruption in critical workloads
  • 1600 MHz DDR3 speed matches board specification
  • Dual-channel 2 x 4 GB kit enables full bandwidth
  • 5 V standard voltage ensures stable operation
  • Guaranteed compatible with Supermicro X10SLL-F, X10SLL+-F, X10SLH-F

Műszaki adatok

BrandComputer Memory Solutions
ModelCM5127212800ECCNR1R8H
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCYes
Buffered/RegisteredUnregistered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemSupermicro X10SLL-F, X10SLL+-F, X10SLH-F Motherboard
Package Content2 Memory RAM Sticks

Kérdések a termékről

How do I verify the kit is running at 1600 MHz with CL11 timing after installation?

Enter the BIOS or use a tool such as CPU-Z; the SPD should show DDR3-1600 (PC3-12800) at 1.5 V with 11-11-11 latency.

What exactly ships in the package and is anything else required?

Two 4 GB 240-pin DDR3 ECC unregistered DIMMs are included; no extra parts are needed for the supported Supermicro boards.

Which capacity option should I choose for a Supermicro X10SLL-F with four DIMM slots?

This 8 GB kit (2 × 4 GB) fills two slots and leaves room to reach the board's 32 GB maximum later.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.