Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green 240-pin DDR3 DIMM modules with black chips

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1600 ECC Unregistered DIMM Supermicro X10SLL-F X10SLL+-F X10SLH-F

SKU CH-1A3D-AQ4S9

8GB dual-channel DDR3-1600 ECC kit with CL11 timing for Supermicro X10SLL series motherboards

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • ECC protection prevents data corruption in critical workloads
  • 1600 MHz DDR3 speed matches board specification
  • Dual-channel 2 x 4 GB kit enables full bandwidth
  • 5 V standard voltage ensures stable operation
  • Guaranteed compatible with Supermicro X10SLL-F, X10SLL+-F, X10SLH-F

8GB DDR3 ECC kit for Supermicro X10SLL-F boards

This 8GB kit contains two 4GB unregistered DIMMs built for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F motherboards. It targets server and workstation builders who need error-correcting memory on these specific platforms. The modules run at DDR3 1600 with CL11 timing and 1.5V operation.

Straightforward DIMM installation

The 240-pin DIMMs install like standard desktop memory by seating them in the board’s four DIMM sockets. No registration step or special tooling is required. The only variable is the heat spreader: current inventory determines whether the sticks ship with one, so confirm that requirement before ordering if clearance is tight.

Verify board model and memory limits before ordering

Ensure the motherboard is exactly one of the three listed Supermicro models; other X10 boards are not covered by the compatibility guarantee. The platform supports up to 32GB total across its four sockets in 1GB, 2GB, 4GB or 8GB DIMM sizes at 1.5V. This kit adds 8GB toward that ceiling.

Kohokohdat

  • ECC protection prevents data corruption in critical workloads
  • 1600 MHz DDR3 speed matches board specification
  • Dual-channel 2 x 4 GB kit enables full bandwidth
  • 5 V standard voltage ensures stable operation
  • Guaranteed compatible with Supermicro X10SLL-F, X10SLL+-F, X10SLH-F

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM5127212800ECCNR1R8H
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCYes
Buffered/RegisteredUnregistered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemSupermicro X10SLL-F, X10SLL+-F, X10SLH-F Motherboard
Package Content2 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

How do I verify the kit is running at 1600 MHz with CL11 timing after installation?

Enter the BIOS or use a tool such as CPU-Z; the SPD should show DDR3-1600 (PC3-12800) at 1.5 V with 11-11-11 latency.

What exactly ships in the package and is anything else required?

Two 4 GB 240-pin DDR3 ECC unregistered DIMMs are included; no extra parts are needed for the supported Supermicro boards.

Which capacity option should I choose for a Supermicro X10SLL-F with four DIMM slots?

This 8 GB kit (2 × 4 GB) fills two slots and leaves room to reach the board's 32 GB maximum later.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.