SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501696BTC
재고 있음
Computer Memory Solutions
Computer Memory Solutions 8GB (2x4GB) DDR3 1600 ECC Unregistered DIMM Supermicro X10SLL-F X10SLL+-F X10SLH-F
8GB dual-channel DDR3-1600 ECC kit with CL11 timing for Supermicro X10SLL series motherboards
- Capacity8GB (2 x 4GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.5V
- ECC protection prevents data corruption in critical workloads
- 1600 MHz DDR3 speed matches board specification
- Dual-channel 2 x 4 GB kit enables full bandwidth
- 5 V standard voltage ensures stable operation
- Guaranteed compatible with Supermicro X10SLL-F, X10SLL+-F, X10SLH-F
8GB DDR3 ECC kit for Supermicro X10SLL-F boards
This 8GB kit contains two 4GB unregistered DIMMs built for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F motherboards. It targets server and workstation builders who need error-correcting memory on these specific platforms. The modules run at DDR3 1600 with CL11 timing and 1.5V operation.
Straightforward DIMM installation
The 240-pin DIMMs install like standard desktop memory by seating them in the board’s four DIMM sockets. No registration step or special tooling is required. The only variable is the heat spreader: current inventory determines whether the sticks ship with one, so confirm that requirement before ordering if clearance is tight.
Verify board model and memory limits before ordering
Ensure the motherboard is exactly one of the three listed Supermicro models; other X10 boards are not covered by the compatibility guarantee. The platform supports up to 32GB total across its four sockets in 1GB, 2GB, 4GB or 8GB DIMM sizes at 1.5V. This kit adds 8GB toward that ceiling.
주요 특징
- ECC protection prevents data corruption in critical workloads
- 1600 MHz DDR3 speed matches board specification
- Dual-channel 2 x 4 GB kit enables full bandwidth
- 5 V standard voltage ensures stable operation
- Guaranteed compatible with Supermicro X10SLL-F, X10SLL+-F, X10SLH-F
사양
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5127212800ECCNR1R8H |
| Capacity | 8GB (2 x 4GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | Supermicro X10SLL-F, X10SLL+-F, X10SLH-F Motherboard |
| Package Content | 2 Memory RAM Sticks |
이 상품에 대한 질문
How do I verify the kit is running at 1600 MHz with CL11 timing after installation?
Enter the BIOS or use a tool such as CPU-Z; the SPD should show DDR3-1600 (PC3-12800) at 1.5 V with 11-11-11 latency.
What exactly ships in the package and is anything else required?
Two 4 GB 240-pin DDR3 ECC unregistered DIMMs are included; no extra parts are needed for the supported Supermicro boards.
Which capacity option should I choose for a Supermicro X10SLL-F with four DIMM slots?
This 8 GB kit (2 × 4 GB) fills two slots and leaves room to reach the board's 32 GB maximum later.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
