Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Silver 3.5 inch SAS hard drive bare unit with label showing 8TB capacity

DELL

DELL 400-AMJF 8TB 3.5" SAS 7200 RPM internal hard drive

SKU CH-BE1W-70KKB

8 TB 3.5-inch SAS hard drive spinning at 7200 RPM with a 12 Gb/s transfer rate for nearline storage

  • PackagingBare Drive
  • InterfaceSAS 3Gb/s
  • Capacity8TB
  • RPM7200 RPM
  • Average Latency3Gb/s
  • Form Factor3.5"
  • 8 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive throughput
  • 12 Gb/s SAS interface supports high-bandwidth transfers
  • 5 inch form factor fits standard drive bays
  • Nearline SAS design suits bulk storage workloads

Dell 8 TB Nearline SAS Drive

The Dell 400-AMJF is an 8 TB 3.5 inch nearline SAS hard drive spinning at 7200 RPM. It is built for servers and storage arrays that need high-capacity bulk storage with dual-port SAS connectivity. Buyers who need boot drives or low-latency transactional performance should look elsewhere.

SAS 12 Gb/s Interface Limits

The drive supports a 12 Gb/s SAS link but the specifications also list a 3 Gb/s average latency figure that reflects the mechanical rotational delay. Throughput will be bounded by the 7200 RPM spindle speed and the SAS protocol overhead. Systems limited to 3 Gb/s or 6 Gb/s backplanes will operate at the lower negotiated speed.

Installation Notes

The unit ships as a bare 3.5 inch drive without a mounting tray or caddy. Installers must supply a compatible hot-plug carrier or fixed bracket for the target chassis. Ensure the backplane provides both SAS data and power connections; a missing 12 V rail is a common cause of spin-up failure.

Erősségek

  • 8 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive throughput
  • 12 Gb/s SAS interface supports high-bandwidth transfers
  • 5 inch form factor fits standard drive bays
  • Nearline SAS design suits bulk storage workloads

Műszaki adatok

BrandDell
Model400-AMJF
PackagingBare Drive
InterfaceSAS 3Gb/s
Capacity8TB
RPM7200 RPM
Average Latency3Gb/s
Form Factor3.5"

Kérdések a termékről

Which SAS speed should I choose for this 8TB 3.5" drive?

The part is supplied with a 12Gb/s SAS interface; your controller will negotiate the highest link speed it supports.

What does the 7.2K speed mean once the drive is installed in a real machine?

7.2K equals 7200 RPM, giving typical nearline throughput and latency for bulk storage workloads.

What does the SAS interface cap in practice?

The SAS link runs at up to 12Gb/s, so sustained transfer is limited by the drive’s mechanical speed and the controller’s queue depth.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.