暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SAS hard drive bare unit with label showing 8TB capacity

DELL

DELL 400-AMJF 8TB 3.5" SAS 7200 RPM internal hard drive

SKU CH-BE1W-70KKB

8 TB 3.5-inch SAS hard drive spinning at 7200 RPM with a 12 Gb/s transfer rate for nearline storage

  • PackagingBare Drive
  • InterfaceSAS 3Gb/s
  • Capacity8TB
  • RPM7200 RPM
  • Average Latency3Gb/s
  • Form Factor3.5"
  • 8 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive throughput
  • 12 Gb/s SAS interface supports high-bandwidth transfers
  • 5 inch form factor fits standard drive bays
  • Nearline SAS design suits bulk storage workloads

Dell 8 TB Nearline SAS Drive

The Dell 400-AMJF is an 8 TB 3.5 inch nearline SAS hard drive spinning at 7200 RPM. It is built for servers and storage arrays that need high-capacity bulk storage with dual-port SAS connectivity. Buyers who need boot drives or low-latency transactional performance should look elsewhere.

SAS 12 Gb/s Interface Limits

The drive supports a 12 Gb/s SAS link but the specifications also list a 3 Gb/s average latency figure that reflects the mechanical rotational delay. Throughput will be bounded by the 7200 RPM spindle speed and the SAS protocol overhead. Systems limited to 3 Gb/s or 6 Gb/s backplanes will operate at the lower negotiated speed.

Installation Notes

The unit ships as a bare 3.5 inch drive without a mounting tray or caddy. Installers must supply a compatible hot-plug carrier or fixed bracket for the target chassis. Ensure the backplane provides both SAS data and power connections; a missing 12 V rail is a common cause of spin-up failure.

特長

  • 8 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive throughput
  • 12 Gb/s SAS interface supports high-bandwidth transfers
  • 5 inch form factor fits standard drive bays
  • Nearline SAS design suits bulk storage workloads

仕様

BrandDell
Model400-AMJF
PackagingBare Drive
InterfaceSAS 3Gb/s
Capacity8TB
RPM7200 RPM
Average Latency3Gb/s
Form Factor3.5"

この商品に関する質問

Which SAS speed should I choose for this 8TB 3.5" drive?

The part is supplied with a 12Gb/s SAS interface; your controller will negotiate the highest link speed it supports.

What does the 7.2K speed mean once the drive is installed in a real machine?

7.2K equals 7200 RPM, giving typical nearline throughput and latency for bulk storage workloads.

What does the SAS interface cap in practice?

The SAS link runs at up to 12Gb/s, so sustained transfer is limited by the drive’s mechanical speed and the controller’s queue depth.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。