DELL
DELL 400-AMJF 8TB 3.5" SAS 7200 RPM internal hard drive
8 TB 3.5-inch SAS hard drive spinning at 7200 RPM with a 12 Gb/s transfer rate for nearline storage
- PackagingBare Drive
- InterfaceSAS 3Gb/s
- Capacity8TB
- RPM7200 RPM
- Average Latency3Gb/s
- Form Factor3.5"
- 8 TB capacity stores large datasets
- 7200 RPM spindle speed delivers responsive throughput
- 12 Gb/s SAS interface supports high-bandwidth transfers
- 5 inch form factor fits standard drive bays
- Nearline SAS design suits bulk storage workloads
Dell 8 TB Nearline SAS Drive
The Dell 400-AMJF is an 8 TB 3.5 inch nearline SAS hard drive spinning at 7200 RPM. It is built for servers and storage arrays that need high-capacity bulk storage with dual-port SAS connectivity. Buyers who need boot drives or low-latency transactional performance should look elsewhere.
SAS 12 Gb/s Interface Limits
The drive supports a 12 Gb/s SAS link but the specifications also list a 3 Gb/s average latency figure that reflects the mechanical rotational delay. Throughput will be bounded by the 7200 RPM spindle speed and the SAS protocol overhead. Systems limited to 3 Gb/s or 6 Gb/s backplanes will operate at the lower negotiated speed.
Installation Notes
The unit ships as a bare 3.5 inch drive without a mounting tray or caddy. Installers must supply a compatible hot-plug carrier or fixed bracket for the target chassis. Ensure the backplane provides both SAS data and power connections; a missing 12 V rail is a common cause of spin-up failure.
Fordele
- 8 TB capacity stores large datasets
- 7200 RPM spindle speed delivers responsive throughput
- 12 Gb/s SAS interface supports high-bandwidth transfers
- 5 inch form factor fits standard drive bays
- Nearline SAS design suits bulk storage workloads
Specifikationer
| Brand | Dell |
|---|---|
| Model | 400-AMJF |
| Packaging | Bare Drive |
| Interface | SAS 3Gb/s |
| Capacity | 8TB |
| RPM | 7200 RPM |
| Average Latency | 3Gb/s |
| Form Factor | 3.5" |
Spørgsmål om denne vare
Which SAS speed should I choose for this 8TB 3.5" drive?
The part is supplied with a 12Gb/s SAS interface; your controller will negotiate the highest link speed it supports.
What does the 7.2K speed mean once the drive is installed in a real machine?
7.2K equals 7200 RPM, giving typical nearline throughput and latency for bulk storage workloads.
What does the SAS interface cap in practice?
The SAS link runs at up to 12Gb/s, so sustained transfer is limited by the drive’s mechanical speed and the controller’s queue depth.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
