Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Silver 2.5 inch SAS hard drive with hot-swap tray, bare drive packaging

DELL

DELL P4PY3 1.8TB 2.5" SAS 10000 RPM internal hard drive

SKU CH-TTDH-1DRE7

A 2.5" SAS hard drive with 1.8TB capacity, 10000 RPM speed and hot-swap support for server storage

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Average Latency6Gb/s
  • Form Factor2.5"
  • 8TB capacity stores large datasets
  • 10000 RPM spindle delivers fast data access
  • SAS 12Gb/s interface enables high throughput
  • 5 inch form factor fits dense server bays
  • Hot-swap tray allows drive replacement without downtime

Dell P4PY3 1.8TB SAS Hard Drive

This Dell P4PY3 is a new 1.8TB 2.5 inch internal hard drive spinning at 10000 RPM. It uses a SAS interface with a 12Gb/s transfer rate and is supplied as a bare drive with hot-swap capability. The unit is designed for desktop and server storage arrays.

Suits servers needing 10K SAS storage

This drive suits administrators who need 1.8TB of 10000 RPM capacity in a 2.5 inch hot-swap form factor for compatible Dell systems. It is not suitable for systems that lack a SAS backplane or controller, or for builds requiring a different physical size or interface.

12Gb/s SAS interface decides fit

The single specification that decides compatibility is the 12Gb/s SAS interface. Your backplane and controller must support this exact interface and speed for the drive to function.

Erősségek

  • 8TB capacity stores large datasets
  • 10000 RPM spindle delivers fast data access
  • SAS 12Gb/s interface enables high throughput
  • 5 inch form factor fits dense server bays
  • Hot-swap tray allows drive replacement without downtime

Műszaki adatok

BrandDell
ModelP4PY3
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity1.8TB
RPM10000 RPM
Average Latency6Gb/s
Form Factor2.5"

Kérdések a termékről

Does my server need a 12 Gb/s SAS backplane to use the 1.8 TB drive at full speed?

The drive supports a 12 Gb/s SAS link, so a 12 Gb/s backplane or controller is required for maximum throughput; it will negotiate down to 6 Gb/s on older SAS infrastructure.

Will the 2.5 inch hot-swap tray fit in a legacy 6 Gb/s SAS enclosure?

Yes, the 2.5 inch hot-swap form factor is physically compatible with standard SAS drive bays, and the drive will operate at 6 Gb/s when connected to a 6 Gb/s backplane.

How can I confirm the 10 000 RPM spindle is running after installation?

Check the drive’s SMART data for a rotational speed of 10 000 RPM and verify the SAS link reports a 12 Gb/s negotiated rate in your RAID controller or OS utilities.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.