DELL
DELL P4PY3 1.8TB 2.5" SAS 10000 RPM internal hard drive
A 2.5" SAS hard drive with 1.8TB capacity, 10000 RPM speed and hot-swap support for server storage
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity1.8TB
- RPM10000 RPM
- Average Latency6Gb/s
- Form Factor2.5"
- 8TB capacity stores large datasets
- 10000 RPM spindle delivers fast data access
- SAS 12Gb/s interface enables high throughput
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Dell P4PY3 1.8TB SAS Hard Drive
This Dell P4PY3 is a new 1.8TB 2.5 inch internal hard drive spinning at 10000 RPM. It uses a SAS interface with a 12Gb/s transfer rate and is supplied as a bare drive with hot-swap capability. The unit is designed for desktop and server storage arrays.
Suits servers needing 10K SAS storage
This drive suits administrators who need 1.8TB of 10000 RPM capacity in a 2.5 inch hot-swap form factor for compatible Dell systems. It is not suitable for systems that lack a SAS backplane or controller, or for builds requiring a different physical size or interface.
12Gb/s SAS interface decides fit
The single specification that decides compatibility is the 12Gb/s SAS interface. Your backplane and controller must support this exact interface and speed for the drive to function.
Høydepunkter
- 8TB capacity stores large datasets
- 10000 RPM spindle delivers fast data access
- SAS 12Gb/s interface enables high throughput
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Spesifikasjoner
| Brand | Dell |
|---|---|
| Model | P4PY3 |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 1.8TB |
| RPM | 10000 RPM |
| Average Latency | 6Gb/s |
| Form Factor | 2.5" |
Spørsmål om denne varen
Does my server need a 12 Gb/s SAS backplane to use the 1.8 TB drive at full speed?
The drive supports a 12 Gb/s SAS link, so a 12 Gb/s backplane or controller is required for maximum throughput; it will negotiate down to 6 Gb/s on older SAS infrastructure.
Will the 2.5 inch hot-swap tray fit in a legacy 6 Gb/s SAS enclosure?
Yes, the 2.5 inch hot-swap form factor is physically compatible with standard SAS drive bays, and the drive will operate at 6 Gb/s when connected to a 6 Gb/s backplane.
How can I confirm the 10 000 RPM spindle is running after installation?
Check the drive’s SMART data for a rotational speed of 10 000 RPM and verify the SAS link reports a 12 Gb/s negotiated rate in your RAID controller or OS utilities.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
