Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 2.5 inch SAS hard drive with hot-swap tray, bare drive packaging

DELL

DELL P4PY3 1.8TB 2.5" SAS 10000 RPM internal hard drive

SKU CH-TTDH-1DRE7

A 2.5" SAS hard drive with 1.8TB capacity, 10000 RPM speed and hot-swap support for server storage

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Average Latency6Gb/s
  • Form Factor2.5"
  • 8TB capacity stores large datasets
  • 10000 RPM spindle delivers fast data access
  • SAS 12Gb/s interface enables high throughput
  • 5 inch form factor fits dense server bays
  • Hot-swap tray allows drive replacement without downtime

Dell P4PY3 1.8TB SAS Hard Drive

This Dell P4PY3 is a new 1.8TB 2.5 inch internal hard drive spinning at 10000 RPM. It uses a SAS interface with a 12Gb/s transfer rate and is supplied as a bare drive with hot-swap capability. The unit is designed for desktop and server storage arrays.

Suits servers needing 10K SAS storage

This drive suits administrators who need 1.8TB of 10000 RPM capacity in a 2.5 inch hot-swap form factor for compatible Dell systems. It is not suitable for systems that lack a SAS backplane or controller, or for builds requiring a different physical size or interface.

12Gb/s SAS interface decides fit

The single specification that decides compatibility is the 12Gb/s SAS interface. Your backplane and controller must support this exact interface and speed for the drive to function.

Priekšrocības

  • 8TB capacity stores large datasets
  • 10000 RPM spindle delivers fast data access
  • SAS 12Gb/s interface enables high throughput
  • 5 inch form factor fits dense server bays
  • Hot-swap tray allows drive replacement without downtime

Specifikācijas

BrandDell
ModelP4PY3
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity1.8TB
RPM10000 RPM
Average Latency6Gb/s
Form Factor2.5"

Jautājumi par šo preci

Does my server need a 12 Gb/s SAS backplane to use the 1.8 TB drive at full speed?

The drive supports a 12 Gb/s SAS link, so a 12 Gb/s backplane or controller is required for maximum throughput; it will negotiate down to 6 Gb/s on older SAS infrastructure.

Will the 2.5 inch hot-swap tray fit in a legacy 6 Gb/s SAS enclosure?

Yes, the 2.5 inch hot-swap form factor is physically compatible with standard SAS drive bays, and the drive will operate at 6 Gb/s when connected to a 6 Gb/s backplane.

How can I confirm the 10 000 RPM spindle is running after installation?

Check the drive’s SMART data for a rotational speed of 10 000 RPM and verify the SAS link reports a 12 Gb/s negotiated rate in your RAID controller or OS utilities.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.