EZ Dupe, Inc. SD Pantera 1-to-15 SD/MicroSD Duplicator (SDC15-SSP)
- SD/MicroSD Duplicat…
- 1 to 15
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
EZ Dupe, Inc.
Standalone duplicator copies up to 39 SD or MicroSD cards at 35 MB/s with DoD-compliant erase modes
The EZ Dupe SD Pantera SDC39-SSP is a standalone duplicator that copies up to 39 Secure Digital or MicroSD cards simultaneously. It operates without a host computer, software or network connection, so each slot runs independently at up to 35 MB/s. The unit is aimed at organisations that need high-volume, secure flash-media duplication in a single appliance.
Moving from a single-slot reader or a PC-driven workflow to this 39-target tower removes the bottleneck of sequential copies and frees the host system for other tasks. The jump is worth it when daily batch sizes exceed a handful of cards and when data must never leave the duplication device, because the standalone architecture keeps the source media physically isolated from any network.
Each of the 39 slots accepts SD, SDHC, SDXC or MicroSD cards and delivers up to 2 GB/min per port. Four copy modes — Quick Copy, Whole Media, All Partitioned and Percentage Copy — handle defined and undefined file systems. Four erase modes include Quick Erase, Full Erase, DoD 3-pass and DoD 7-pass to the 5220.22-M standard, so the same hardware covers both duplication and compliant sanitisation.
| Brand | EZ Dupe |
|---|---|
| Type | SD/MicroSD Duplicator |
| Model | SD Pantera |
| Part Number | SDC39-SSP |
| Target | 1 to 39 |
| Buffer Memory | 128M |
| Supported Media | Secure Digital / MicroSD |
| Data Transfer Rate | 2GB/min |
| Operating Type | Standalone |
| Display | 16 x 2 LCD |
| Connector | Secure Digital / MicroSD |
| Dimensions (H x W x D) | 14.75 x 7.2 x 13 |
| Load Type | Slot |
| Key Features | Standalone |
| Features | Duplication |
| Power Supply | AC: 115-230 V, 50/60 Hz |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The unit measures 14.75 inches high, 7.2 inches wide and 13 inches deep, so allow at least that much clearance on a bench or shelf.
Insert the master SD or MicroSD card into the dedicated source slot, then load up to 39 target cards into the remaining slots before selecting a copy mode on the 16 x 2 LCD menu.
Keep the 39 card slots free of dust and debris; the 128 MB buffer and standalone firmware need no user-serviceable parts or scheduled maintenance.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?