暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

EZ Dupe, Inc.

EZ Dupe, Inc. SD Pantera Duplicator 1-39 SDC39-SSP

SKU CH-E71S-N54PB

Standalone duplicator copies up to 39 SD or MicroSD cards at 35 MB/s with DoD-compliant erase modes

  • TypeSD/MicroSD Duplicator
  • Target1 to 39
  • Buffer Memory128M
  • Supported MediaSecure Digital / MicroSD
  • Data Transfer Rate2GB/min
  • Operating TypeStandalone
  • Copy 39 cards simultaneously at 35 MB/s per slot
  • Four copy modes including Quick Copy and Percentage Copy
  • Four erase modes with DoD 3-pass and 7-pass compliance
  • Standalone operation with 16×2 LCD, no PC required
  • Supports SD and MicroSD cards in dedicated slots

Standalone 1-to-39 SD duplicator

The EZ Dupe SD Pantera SDC39-SSP is a standalone duplicator that copies up to 39 Secure Digital or MicroSD cards simultaneously. It operates without a host computer, software or network connection, so each slot runs independently at up to 35 MB/s. The unit is aimed at organisations that need high-volume, secure flash-media duplication in a single appliance.

Upgrade from single-slot or PC-based copying

Moving from a single-slot reader or a PC-driven workflow to this 39-target tower removes the bottleneck of sequential copies and frees the host system for other tasks. The jump is worth it when daily batch sizes exceed a handful of cards and when data must never leave the duplication device, because the standalone architecture keeps the source media physically isolated from any network.

39-slot capacity with DoD-grade sanitisation

Each of the 39 slots accepts SD, SDHC, SDXC or MicroSD cards and delivers up to 2 GB/min per port. Four copy modes — Quick Copy, Whole Media, All Partitioned and Percentage Copy — handle defined and undefined file systems. Four erase modes include Quick Erase, Full Erase, DoD 3-pass and DoD 7-pass to the 5220.22-M standard, so the same hardware covers both duplication and compliant sanitisation.

特長

  • Copy 39 cards simultaneously at 35 MB/s per slot
  • Four copy modes including Quick Copy and Percentage Copy
  • Four erase modes with DoD 3-pass and 7-pass compliance
  • Standalone operation with 16×2 LCD, no PC required
  • Supports SD and MicroSD cards in dedicated slots

仕様

BrandEZ Dupe
TypeSD/MicroSD Duplicator
ModelSD Pantera
Part NumberSDC39-SSP
Target1 to 39
Buffer Memory128M
Supported MediaSecure Digital / MicroSD
Data Transfer Rate2GB/min
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSecure Digital / MicroSD
Dimensions (H x W x D)14.75 x 7.2 x 13
Load TypeSlot
Key FeaturesStandalone
FeaturesDuplication
Power SupplyAC: 115-230 V, 50/60 Hz

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What are the exact height, width and depth measurements I need to clear for the SD Pantera duplicator?

The unit measures 14.75 inches high, 7.2 inches wide and 13 inches deep, so allow at least that much clearance on a bench or shelf.

Which step do users most often miss when setting up the duplicator for the first time?

Insert the master SD or MicroSD card into the dedicated source slot, then load up to 39 target cards into the remaining slots before selecting a copy mode on the 16 x 2 LCD menu.

What ongoing upkeep does the SD Pantera require after heavy use?

Keep the 39 card slots free of dust and debris; the 128 MB buffer and standalone firmware need no user-serviceable parts or scheduled maintenance.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。