暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

EZ Dupe, Inc.

EZ Dupe SD Pantera SDC23-SSP duplicator 1 to 23 2GB/min

SKU CH-NHEN-3VSTW

Standalone duplicator copies up to 23 SD or MicroSD cards at 2 GB/min with DoD-compliant erase modes

  • TypeSD/MicroSD Duplicator
  • Target1 to 23
  • Buffer Memory128M
  • Supported MediaSecure Digital / MicroSD
  • Data Transfer Rate2GB/min
  • Operating TypeStandalone
  • Copy 23 cards simultaneously at 35 MB/s per slot
  • Four copy modes cover quick, full, partitioned and percentage duplication
  • Four erase modes include DoD 3-pass and 7-pass sanitisation
  • Standalone operation with 16×2 LCD needs no host computer
  • 128 MB buffer maintains steady throughput across all slots

Standalone SD and MicroSD duplicator

The EZ Dupe SD Pantera SDC23-SSP copies up to 23 Secure Digital or MicroSD cards at once without a host computer. Each slot runs independently at up to 35 MB per second, reaching about 2 GB per minute per card. A 16 x 2 LCD and onboard controls let operators select copy or erase modes directly on the unit.

IT teams and media houses needing secure bulk

This duplicator suits organisations that must clone large batches of SDHC or SDXC cards and also require certified data sanitisation. Four copy modes and four erase modes, including DoD 3-pass and 7-pass options, cover both rapid deployment and compliance workflows. Buyers who need to duplicate other flash form factors such as USB drives or CFexpress cards should look at a different platform.

23 independent slots at 35 MB per second

The single specification that decides fit is the combination of 23 target slots and a sustained 35 MB per second per slot. If the workload demands fewer simultaneous targets or lower throughput, a smaller duplicator will cost less; if it demands more targets or higher per-slot speed, this model will not keep pace.

特長

  • Copy 23 cards simultaneously at 35 MB/s per slot
  • Four copy modes cover quick, full, partitioned and percentage duplication
  • Four erase modes include DoD 3-pass and 7-pass sanitisation
  • Standalone operation with 16×2 LCD needs no host computer
  • 128 MB buffer maintains steady throughput across all slots

仕様

BrandEZ Dupe
TypeSD/MicroSD Duplicator
ModelSD Pantera
Part NumberSDC23-SSP
Target1 to 23
Buffer Memory128M
Supported MediaSecure Digital / MicroSD
Data Transfer Rate2GB/min
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSecure Digital / MicroSD
Dimensions (H x W x D)11 x 7.2 x 13
Load TypeSlot
Key FeaturesStandalone
FeaturesDuplication
Power SupplyAC: 115-230 V, 50/60 Hz

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the SD card slots wear out after repeated high-volume duplication cycles?

The unit uses slot-load connectors rated for professional duplication workloads; no user-replaceable slot modules are specified by the manufacturer.

Which limit appears first when copying to all 23 targets continuously — throughput or thermal throttling?

Each of the 23 ports runs independently at up to 35 MB/s, so aggregate throughput scales with target count without a shared bus bottleneck.

How much heat and fan noise should I expect during an all-day 23-target duplication run?

The duplicator operates from a 115-230 V 50/60 Hz supply in an 11 x 7.2 x 13 inch chassis with no supplemental cooling details published.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。