EZ Dupe, Inc. SD Pantera 1-to-7 SD/MicroSD Duplicator 35MB/s SDC07-SSP
- SD/MicroSD Duplicat…
- 1 to 7
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
EZ Dupe, Inc.
Standalone duplicator copies up to 23 SD or MicroSD cards at 2 GB/min with DoD-compliant erase modes
The EZ Dupe SD Pantera SDC23-SSP copies up to 23 Secure Digital or MicroSD cards at once without a host computer. Each slot runs independently at up to 35 MB per second, reaching about 2 GB per minute per card. A 16 x 2 LCD and onboard controls let operators select copy or erase modes directly on the unit.
This duplicator suits organisations that must clone large batches of SDHC or SDXC cards and also require certified data sanitisation. Four copy modes and four erase modes, including DoD 3-pass and 7-pass options, cover both rapid deployment and compliance workflows. Buyers who need to duplicate other flash form factors such as USB drives or CFexpress cards should look at a different platform.
The single specification that decides fit is the combination of 23 target slots and a sustained 35 MB per second per slot. If the workload demands fewer simultaneous targets or lower throughput, a smaller duplicator will cost less; if it demands more targets or higher per-slot speed, this model will not keep pace.
| Brand | EZ Dupe |
|---|---|
| Type | SD/MicroSD Duplicator |
| Model | SD Pantera |
| Part Number | SDC23-SSP |
| Target | 1 to 23 |
| Buffer Memory | 128M |
| Supported Media | Secure Digital / MicroSD |
| Data Transfer Rate | 2GB/min |
| Operating Type | Standalone |
| Display | 16 x 2 LCD |
| Connector | Secure Digital / MicroSD |
| Dimensions (H x W x D) | 11 x 7.2 x 13 |
| Load Type | Slot |
| Key Features | Standalone |
| Features | Duplication |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The unit uses slot-load connectors rated for professional duplication workloads; no user-replaceable slot modules are specified by the manufacturer.
Each of the 23 ports runs independently at up to 35 MB/s, so aggregate throughput scales with target count without a shared bus bottleneck.
The duplicator operates from a 115-230 V 50/60 Hz supply in an 11 x 7.2 x 13 inch chassis with no supplemental cooling details published.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?