EZ Dupe, Inc. SD Pantera 1-to-7 SD/MicroSD Duplicator 35MB/s SDC07-SSP
- SD/MicroSD Duplicat…
- 1 to 7
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
EZ Dupe, Inc.
Standalone duplicator copies up to 23 SD or MicroSD cards at 2 GB/min with DoD-compliant erase modes
The EZ Dupe SD Pantera SDC23-SSP copies up to 23 Secure Digital or MicroSD cards at once without a host computer. Each slot runs independently at up to 35 MB per second, reaching about 2 GB per minute per card. A 16 x 2 LCD and onboard controls let operators select copy or erase modes directly on the unit.
This duplicator suits organisations that must clone large batches of SDHC or SDXC cards and also require certified data sanitisation. Four copy modes and four erase modes, including DoD 3-pass and 7-pass options, cover both rapid deployment and compliance workflows. Buyers who need to duplicate other flash form factors such as USB drives or CFexpress cards should look at a different platform.
The single specification that decides fit is the combination of 23 target slots and a sustained 35 MB per second per slot. If the workload demands fewer simultaneous targets or lower throughput, a smaller duplicator will cost less; if it demands more targets or higher per-slot speed, this model will not keep pace.
| Brand | EZ Dupe |
|---|---|
| Type | SD/MicroSD Duplicator |
| Model | SD Pantera |
| Part Number | SDC23-SSP |
| Target | 1 to 23 |
| Buffer Memory | 128M |
| Supported Media | Secure Digital / MicroSD |
| Data Transfer Rate | 2GB/min |
| Operating Type | Standalone |
| Display | 16 x 2 LCD |
| Connector | Secure Digital / MicroSD |
| Dimensions (H x W x D) | 11 x 7.2 x 13 |
| Load Type | Slot |
| Key Features | Standalone |
| Features | Duplication |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The unit uses slot-load connectors rated for professional duplication workloads; no user-replaceable slot modules are specified by the manufacturer.
Each of the 23 ports runs independently at up to 35 MB/s, so aggregate throughput scales with target count without a shared bus bottleneck.
The duplicator operates from a 115-230 V 50/60 Hz supply in an 11 x 7.2 x 13 inch chassis with no supplemental cooling details published.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?